Coin Mechs and Japanese Machines
- Ringtail
- Please Continue...
- Posts: 106
- Joined: August 17th, 2008, 8:18 pm
- Location:
Coin Mechs and Japanese Machines
I may have a couple of Japanese dedicated Music cabs coming in the few weeks and i've been lead to believe they all use mechanical mechs over there, is it easy to add an electronic mech to these machines or are we better just grabbing a couple of 50p mechs?
People have the right to be stupid, but some abuse that privilege.
- Akuma
- Can't stay away from students
- Posts: 2334
- Joined: August 24th, 2008, 11:29 am
- Location: near Düsseldorf, Germany
- eBay: Akuma.from.the.Arcade
Re: Coin Mechs and Japanese Machines
I'd say latter since it is just an easy swap but you know - almost everything can be done
- Ringtail
- Please Continue...
- Posts: 106
- Joined: August 17th, 2008, 8:18 pm
- Location:
Re: Coin Mechs and Japanese Machines
Cool I'll get the hammer and the power toolsAkuma wrote:almost everything can be done
People have the right to be stupid, but some abuse that privilege.
- AeroCityMayor
- Previously alien_mame
- Posts: 2005
- Joined: July 25th, 2009, 1:05 pm
- Location: West Yorks, UK
- eBay: air_fortless
- Initials: ACM
Re: Coin Mechs and Japanese Machines
duplicate post - sorry
Last edited by AeroCityMayor on March 5th, 2011, 7:15 am, edited 1 time in total.
- AeroCityMayor
- Previously alien_mame
- Posts: 2005
- Joined: July 25th, 2009, 1:05 pm
- Location: West Yorks, UK
- eBay: air_fortless
- Initials: ACM
Re: Coin Mechs and Japanese Machines
You may find that space is the issue. I'm not sure whether you'll find an electronic coin mech to drop straight in, but you might be able to get hold of a cradale as well. something like a NAOMI UK coin mech could do the trick.
HTH
Cheers,
Ralph.
HTH
Cheers,
Ralph.
- Akuma
- Can't stay away from students
- Posts: 2334
- Joined: August 24th, 2008, 11:29 am
- Location: near Düsseldorf, Germany
- eBay: Akuma.from.the.Arcade
Re: Coin Mechs and Japanese Machines
The SR3 coin mech for example is the same size as a normal mechanical one. You just have to fit the credit board somewhere...