Taito Vewlix Cab Differences

Arcade cabinet hardware and accessories
Post Reply
User avatar
Ringtail
Posts: 106
Joined: August 17th, 2008, 8:18 pm
Location:

Taito Vewlix Cab Differences

Post by Ringtail » August 22nd, 2008, 10:58 am

I remember before KC went down that someone had highlighted the differences between the original Vewlix and the new black and white model. Does anyone still have those details handy?
Last edited by Ringtail on August 22nd, 2008, 11:19 am, edited 1 time in total.

User avatar
Mayhem
Posts: 264
Joined: August 17th, 2008, 10:15 pm
Location: Stockholm, Sweden
eBay: Mayhem_SWE
Contact:

Re: Taito Viewlux Cab Differences

Post by Mayhem » August 22nd, 2008, 11:07 am

Vewlix. Vewlix. Vewlix.
It's called the goddamn VEWLIX!
:P

User avatar
mission
Please Continue...
Posts: 68
Joined: August 17th, 2008, 4:02 pm
Location: Westmidlands , UK

Re: Taito Viewlux Cab Differences

Post by mission » August 22nd, 2008, 11:10 am

Image

User avatar
Ringtail
Posts: 106
Joined: August 17th, 2008, 8:18 pm
Location:

Re: Taito Viewlux Cab Differences

Post by Ringtail » August 22nd, 2008, 11:20 am

Mayhem wrote:Vewlix. Vewlix. Vewlix.
It's called the goddamn VEWLIX!
:P
*cough* Edited :oops:

And thanks Mission :)

redstallone
Posts: 274
Joined: August 20th, 2008, 4:37 pm
Location: Austria
eBay: redstallone

Re: Taito Vewlix Cab Differences

Post by redstallone » August 22nd, 2008, 1:08 pm

I`m wondering why the Vewlix Cabs don`t have an HDMI or DVI port, just VGA......that makes sense?! :?

User avatar
Ringtail
Posts: 106
Joined: August 17th, 2008, 8:18 pm
Location:

Re: Taito Vewlix Cab Differences

Post by Ringtail » August 22nd, 2008, 1:52 pm

redstallone wrote:I`m wondering why the Vewlix Cabs don`t have an HDMI or DVI port, just VGA......that makes sense?! :?
Probably just based around their own hardware, I assume the Type X2 dosen't have them either :P

Mr-Megalo
Posts: 295
Joined: August 20th, 2008, 11:46 am
Location: OFFLINE

Re: Taito Vewlix Cab Differences

Post by Mr-Megalo » August 22nd, 2008, 11:34 pm

type X 2 and the "regular" Vewlix are DVI
type X 2 output from its graphics card is DVI, but uses a VGA gender convertor and as default the vewlix has only got a VGA cable connected up - the monitor can accept input either via its VGA port or DVI

User avatar
mufunyo
Posts: 676
Joined: August 21st, 2008, 12:26 am
Location: Eindhoven, NL
eBay: mufunyo
Initials: MUF

Re: Taito Vewlix Cab Differences

Post by mufunyo » August 28th, 2008, 4:36 pm

Also, my Type-X (not X+ or X2) won't synch up over DVI-D, only DVI-A (which is equivalent to D-sub). I was pretty disappointed about that cause it takes away the entire advantage of using DVI in the first place. I think it has to do with Windows Embedded being profiled to a static hardware configuration, and DVI-D/DVI-A is usually autodetected by the ATI driver when you plug in the cable.
Image

suicidalmonkey
Posts: 27
Joined: August 31st, 2008, 6:44 am
Location: USA

Re: Taito Vewlix Cab Differences

Post by suicidalmonkey » August 31st, 2008, 8:19 am

If I remember correctly (since I had a japanese guy at work translate that graphic for me) the only real differences between the full blown vewlix and the "light" vewlix were the lack of a power supply, lack of translucent red parts, and a cheaper monitor. I don't know how much worse the monitor is, or how much whatever power supply they are using is, but something tells me it's not worth 1500 dollars

Oh, and just in case someone else asks anything else about that graphic, the G and D cabinets are the namco and delta32 cabinets respectively if I'm not mistaken.

User avatar
_xizor
Posts: 143
Joined: August 17th, 2008, 5:40 pm
Location: Canada

Re: Taito Vewlix Cab Differences

Post by _xizor » September 1st, 2008, 5:11 pm

Check out the Gallery.

I posted pics of a Vewlix F and a Vewlix L.... should keep the conversation going for a while...

User avatar
_xizor
Posts: 143
Joined: August 17th, 2008, 5:40 pm
Location: Canada

Re: Taito Vewlix Cab Differences

Post by _xizor » September 6th, 2008, 5:28 am

Ask and you shall eventually receive...
Here are the differences...

POWER SUPPLY (JAMMA SPEC)
Vewlix-F = EQUIPPED
Vewlix-L = OPTION

EEFL UNIT INSIDE CONTROL PANEL
(BACK LIGHT FOR PLAY INSTRUCTION)
Vewlix-F = EQUIPPED
Vewlix-L = NONE


LED-PCB FOR LIGHTING INSIDE TITLE
PANEL OF THE UPPER PART
Vewlix-F = EQUIPPED
Vewlix-L = NONE

AC POWER SWITCH
Vewlix-F = THE FRONT & BACK
Vewlix-L = THE FRONT ONLY

WOOD ELECTRIC BOARD OF THE BOTTOM
Vewlix-F = YES
Vewlix-L = YES, BUT A LITTLE SMALLER THAN "F"

LENGTH OF AC CORD
Vewlix-F = 3m
Vewlix-L = 2m

LCD PANEL
Vewlix-F = SANWA LCD
Vewlix-L = NON-SANWA - RESPONSE SPEED IS A LITTLE SLOWER THAN "F" (As in higher Milliseconds)
Last edited by _xizor on September 6th, 2008, 3:34 pm, edited 1 time in total.

Sigmae
Posts: 6
Joined: September 5th, 2008, 5:24 am
Location:

Re: Taito Vewlix Cab Differences

Post by Sigmae » September 6th, 2008, 5:51 am

Do you mean that the grey to grey response time is higher on the L or that there is less input delay?

User avatar
Ringtail
Posts: 106
Joined: August 17th, 2008, 8:18 pm
Location:

Re: Taito Vewlix Cab Differences

Post by Ringtail » September 6th, 2008, 7:20 am

_Xizor Thank you :)
People have the right to be stupid, but some abuse that privilege.

User avatar
RHADAMANTHE
Posts: 2
Joined: September 2nd, 2008, 2:23 am
Location: France

Re: Taito Vewlix Cab Differences

Post by RHADAMANTHE » September 6th, 2008, 1:47 pm

For the lcd pannel , on my vewlix L cab it is GTT and samsung for the dale .

User avatar
_xizor
Posts: 143
Joined: August 17th, 2008, 5:40 pm
Location: Canada

Re: Taito Vewlix Cab Differences

Post by _xizor » September 6th, 2008, 3:33 pm

The Vewlix F SANWA monitor *apparently* has a lower millisecond response then the Vewlix L monitor.
...but they still have not given me the spec...

Post Reply