Rotating on a Aero City
-
- Please Continue...
- Posts: 26
- Joined: September 8th, 2008, 2:22 am
- Location: Lawndale, CA US
Rotating on a Aero City
Hey Guys, Awesome site! I have an Aero City cab that I'd like to rotate. I just wanted to know what tool to use when removing the glass on the Aero in order to rotate the monitor bezel. It looks like a regular star shaped screw only the screw driver or socket must have a hole in the center since there is a tiny cylinder in the center of the star. I haven't been able to find any such tool but then again, I'm not sure what I'm looking for. Thanks for your help!
- AeroCityMayor
- Previously alien_mame
- Posts: 2005
- Joined: July 25th, 2009, 1:05 pm
- Location: West Yorks, UK
- eBay: air_fortless
- Initials: ACM
Re: Rotating on a Aero City
Hi there,
Don't remove the glass, open up the control panel and lift up the screen cover/bezel.
See mastercello's thread Here:-
http://arcadeotaku.com/forum/viewtopic. ... &sk=t&sd=a"
Don't remove the glass, open up the control panel and lift up the screen cover/bezel.
See mastercello's thread Here:-
http://arcadeotaku.com/forum/viewtopic. ... &sk=t&sd=a"
- AeroCityMayor
- Previously alien_mame
- Posts: 2005
- Joined: July 25th, 2009, 1:05 pm
- Location: West Yorks, UK
- eBay: air_fortless
- Initials: ACM
Re: Rotating on a Aero City
Incidentally, it's a tamperproof or security torx set you're lookin for.
-
- Please Continue...
- Posts: 26
- Joined: September 8th, 2008, 2:22 am
- Location: Lawndale, CA US
Re: Rotating on a Aero City
Thanks! I just checked it out. The black plastic bezel looks to be screwed in between the glass and the metal outer bezel so I don't think I can just pull it off. At least it was not easily moved. I think I'd have to remove the glass. Also, thanks a ton for the security torx recommendation. That's exactly what they are!
- charlie chong
- Posts: 211
- Joined: August 18th, 2008, 9:46 am
- Location: edinburgh
Re: Rotating on a Aero City
yep my bezel is screwed in between the glass and teh monitor hood so you gonna have to take off the glass. when i didn't have a torx set i managed to unscrew from the underneath the hood with a set of pliars but you might damage the thread doing it that way i guess
-
- Please Continue...
- Posts: 26
- Joined: September 8th, 2008, 2:22 am
- Location: Lawndale, CA US
Re: Rotating on a Aero City
Hahaha, I can't believe I didn't think of that. Well needle nose pliers and rag loosened them enough to do the rest with the fingers. Thanks for the tip!