Aerotable SEGA
- krellz
- Posts: 22
- Joined: November 15th, 2010, 9:34 am
- Location:
Aerotable SEGA
hi,
i need for increase the 5 volts for my aerotable, because some old game not works properly or not start !
where located in the cabinet?
possible to buy or download service manual ?
and how i can to find sapre parts for aerotable ,and monitor new sega ?
greetings
krell
i need for increase the 5 volts for my aerotable, because some old game not works properly or not start !
where located in the cabinet?
possible to buy or download service manual ?
and how i can to find sapre parts for aerotable ,and monitor new sega ?
greetings
krell
- yosai
- Windy City
- Posts: 4061
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
Re: Aerotable SEGA
There is an Aero City manual here, not sure if it's any help.
http://wiki.arcadeotaku.com/w/File:Sega ... Manual.pdf"
http://wiki.arcadeotaku.com/w/File:Sega ... Manual.pdf"
- krellz
- Posts: 22
- Joined: November 15th, 2010, 9:34 am
- Location:
Re: Aerotable SEGA
i think that the same cab.... i hope...yosai wrote:There is an Aero City manual here, not sure if it's any help.
http://wiki.arcadeotaku.com/w/File:Sega ... Manual.pdf"
- richy13
- Ming the Merciless
- Posts: 792
- Joined: July 25th, 2009, 12:38 am
- Location: UK
- eBay: ...
Re: Aerotable SEGA
i have never seen a Aero Table manaul Not even a scan/PDF.
- markedkiller78
- Pony fucker
- Posts: 7585
- Joined: August 17th, 2008, 6:53 pm
- Location: Glasgow
- eBay: markedkiller78
- Initials: MAL
Re: Aerotable SEGA
If it’s anything like the table I have, then it’s a total PITA.
You have to remove the monitor (and keep it powered) as the PSU is at the left corner on the cab body. You might be able to access it if the monitor was tate?
You also need to either
a) Have a second person at the Jamma harness
b) Pull the wiring up to the left side of the cab & adjust the PSU whilst keeping an eye on the multi meter.
I’ve set mine to run CPS2 & tbh I don’t see me ever messing with it again.
If someone has an easier solution, please let me know as I had a hellish time At least a 26” monitor is easy to lift on your own. Silver lining to every cloud etc……
You have to remove the monitor (and keep it powered) as the PSU is at the left corner on the cab body. You might be able to access it if the monitor was tate?
You also need to either
a) Have a second person at the Jamma harness
b) Pull the wiring up to the left side of the cab & adjust the PSU whilst keeping an eye on the multi meter.
I’ve set mine to run CPS2 & tbh I don’t see me ever messing with it again.
If someone has an easier solution, please let me know as I had a hellish time At least a 26” monitor is easy to lift on your own. Silver lining to every cloud etc……
- thegreathopper
- Geese's Bodyguard
- Posts: 1695
- Joined: August 17th, 2008, 6:56 pm
- Location: London
- eBay: thegreathopper
- Initials: STV
Re: Aerotable SEGA
Hi Krell,krellz wrote:hi,
i need for increase the 5 volts for my aerotable, because some old game not works properly or not start !
where located in the cabinet?
possible to buy or download service manual ?
and how i can to find sapre parts for aerotable ,and monitor new sega ?
greetings
krell
Mo at Videotronics has these monitors for about £80, Keep your frame as Mo's will have a larger frame but the monitor will be the correct size Nanao MS26-8.
The power supply is in the top left corner and fitted to a piece of wood that will slide out, There will be a small hole on one side to adjust the + 5 Volts.
- markedkiller78
- Pony fucker
- Posts: 7585
- Joined: August 17th, 2008, 6:53 pm
- Location: Glasgow
- eBay: markedkiller78
- Initials: MAL
Re: Aerotable SEGA
how does is slide Steve? Mine is directly udner the edge of the monitor & behind the coin box.thegreathopper wrote: The power supply is in the top left corner and fitted to a piece of wood that will slide out, There will be a small hole on one side to adjust the + 5 Volts.
Could be that they sorted this issue with the AT?
- SuperPang
- Master or universe
- Posts: 11023
- Joined: August 16th, 2008, 2:45 pm
- Location: UK
- eBay: *_*
- Initials: JOE
- Contact:
Re: Aerotable SEGA
I think I might have one, or maybe its just the wiring schematic. I'll have a look later.richy13 wrote:i have never seen a Aero Table manaul Not even a scan/PDF.
- penrhos
- Panel Beater
- Posts: 1477
- Joined: September 11th, 2008, 12:08 pm
- Location: Leicester - UK
- eBay: ngpd002
Re: Aerotable SEGA
The one I had the PSU was behind the coin box and there was a door held in place with 4 screws you could remove the get at it.
2 * Vewlix Diamond Blacks,2 * Vewlix-F, 1 * Sega Rally 3, 1 * Video Pinball, 1 * DinoKing (JAMMA Converted).
- markedkiller78
- Pony fucker
- Posts: 7585
- Joined: August 17th, 2008, 6:53 pm
- Location: Glasgow
- eBay: markedkiller78
- Initials: MAL
Re: Aerotable SEGA
So that's what that's for. Mine doesnt have that The clearly learned form their mistakes with the 2nd generationpenrhos wrote:The one I had the PSU was behind the coin box and there was a door held in place with 4 screws you could remove the get at it.
- thegreathopper
- Geese's Bodyguard
- Posts: 1695
- Joined: August 17th, 2008, 6:56 pm
- Location: London
- eBay: thegreathopper
- Initials: STV
Re: Aerotable SEGA
Pretty sure it slides up the same as the wood that holds the pcb, I think you can only access this way when you have the screen in the vertical position.markedkiller78 wrote:how does is slide Steve? Mine is directly udner the edge of the monitor & behind the coin box.thegreathopper wrote: The power supply is in the top left corner and fitted to a piece of wood that will slide out, There will be a small hole on one side to adjust the + 5 Volts.
Could be that they sorted this issue with the AT?
- krellz
- Posts: 22
- Joined: November 15th, 2010, 9:34 am
- Location:
Re: Aerotable SEGA
hello, but Videotronics ,possible to have an original nanao ?thegreathopper wrote:Hi Krell,krellz wrote:hi,
i need for increase the 5 volts for my aerotable, because some old game not works properly or not start !
where located in the cabinet?
possible to buy or download service manual ?
and how i can to find sapre parts for aerotable ,and monitor new sega ?
greetings
krell
Mo at Videotronics has these monitors for about £80, Keep your frame as Mo's will have a larger frame but the monitor will be the correct size Nanao MS26-8.
The power supply is in the top left corner and fitted to a piece of wood that will slide out, There will be a small hole on one side to adjust the + 5 Volts.
further, i make some photo for the inner
how it's made the 5volt regolator ?
- krellz
- Posts: 22
- Joined: November 15th, 2010, 9:34 am
- Location:
Re: Aerotable SEGA
another games not working on audio !! (it' galaga '88) perfect on normal old cabinet