Hi guys!
I`ve a problem with my SC 19 cab.
Sometimes it works fine, sometimes not.
If it`s not working, i have to switch on/off the cab for about 5 times...than it works fine again.
First i thought its a monitor problem, but i think it`s a voltage problem.
Because if it`s "not working" i got a monitor-noise (normal noise like its working)...but without picture, and i can`t coin-in, and there`s no sound.
Thanks for any help! greets redstallone
SNK SC19 voltage problem?
-
- Posts: 276
- Joined: August 20th, 2008, 4:37 pm
- Location: Austria
- eBay: redstallone
SNK SC19 voltage problem?
You do not have the required permissions to view the files attached to this post.
- Wurstkopp
- Mister Dick Statue
- Posts: 744
- Joined: March 26th, 2009, 6:50 pm
- Location: Hamburg, Germany
- eBay: nachmittagsprogramm
- Initials: NIK
Re: SNK SC19 voltage problem?
Have u measured out the voltages of the psu? Maybe too less +5V.
Also I see the -5V are not connected...
Also I see the -5V are not connected...
- nvs
- Please Continue...
- Posts: 175
- Joined: September 5th, 2009, 4:34 am
- Location: Inbetween
Re: SNK SC19 voltage problem?
No -5v required for MVS so that's not an issue.
Does this happen with any PCB or just the one you've got in there now? Assuming the board in there works fine on other cabs.
I think I might've seen something similar with one of my SC19s in the past but I recall audio playing and the flyback screaming at me, so no doubt monitor specific in my case.
Does this happen with any PCB or just the one you've got in there now? Assuming the board in there works fine on other cabs.
I think I might've seen something similar with one of my SC19s in the past but I recall audio playing and the flyback screaming at me, so no doubt monitor specific in my case.
..!
-
- Posts: 276
- Joined: August 20th, 2008, 4:37 pm
- Location: Austria
- eBay: redstallone
Re: SNK SC19 voltage problem?
It was a PSU death , problem solved.
Thanks for reply guys!
Thanks for reply guys!
You do not have the required permissions to view the files attached to this post.
- nvs
- Please Continue...
- Posts: 175
- Joined: September 5th, 2009, 4:34 am
- Location: Inbetween
- Wurstkopp
- Mister Dick Statue
- Posts: 744
- Joined: March 26th, 2009, 6:50 pm
- Location: Hamburg, Germany
- eBay: nachmittagsprogramm
- Initials: NIK
Re: SNK SC19 voltage problem?
Luckilily nothing serious .
-
- Posts: 276
- Joined: August 20th, 2008, 4:37 pm
- Location: Austria
- eBay: redstallone
Re: SNK SC19 voltage problem?
yeah, it was much work...and now it`s in beautiful condition
- voyou1
- #cavesunday
- Posts: 35
- Joined: January 14th, 2013, 8:34 pm
- Location:
Re: SNK SC19 voltage problem?
Hinvs wrote:No -5v required for MVS so that's not an issue.
Does this happen with any PCB or just the one you've got in there now? Assuming the board in there works fine on other cabs.
I think I might've seen something similar with one of my SC19s in the past but I recall audio playing and the flyback screaming at me, so no doubt monitor specific in my case.
I've the same problem you had with your neo sc19.
during play the screen switch off randomly, but sound is ok, with an awfull scream. Do you remeber the way of fixing it?
thanks for helping
nicolas