hi Guys !
i have a little problem here.
i just tested my Muchi Pork on my Aero and i have some flickering in the picture and no sound for some reason.
i checked the volage and its 5.3V (or was it 5.2V , not sure) and 12.2V , may this be the reason ? :/
i hooked uo the Hyper Neo Geo , result was 11.9xV and 4,8V and no problems at all. picture is perfect and no sound issue
Sega Aero and Cave SH3 *solved*
- Jan
- EU trade negotiator
- Posts: 3848
- Joined: August 17th, 2008, 7:56 pm
- Location: Germany
- eBay: voll gerne
Sega Aero and Cave SH3 *solved*
Last edited by Jan on August 11th, 2010, 7:36 am, edited 1 time in total.
ain't got no realestateorjewelryoranyofthat
- cools
- Armed Police Buttrider
- Posts: 13459
- Joined: August 17th, 2008, 4:49 pm
- Location: Wales, United Kingdom
- eBay: hordarian
- Initials: CLS
Re: Sega Aero and Cave SH3
Checking voltages when changing PCBs win.
- Jan
- EU trade negotiator
- Posts: 3848
- Joined: August 17th, 2008, 7:56 pm
- Location: Germany
- eBay: voll gerne
Re: Sega Aero and Cave SH3
i`m not realy sure if 0.2V can cause these problems :/
ain't got no realestateorjewelryoranyofthat
- ReplicaX
- Posts: 138
- Joined: August 3rd, 2010, 6:20 pm
- Location: Boston, MA
- eBay: xreplica_x
- Initials: REP
Re: Sega Aero and Cave SH3
It's possible it might not have enough amperage on one of the lines. What's the power supply rated at for Amps of each voltage?
Q GrandAm 25 | MKII | NNC | Vewlix L AMI | Medieval Madness RE
Arcade Tech since 1994
Arcade Tech since 1994
- Jan
- EU trade negotiator
- Posts: 3848
- Joined: August 17th, 2008, 7:56 pm
- Location: Germany
- eBay: voll gerne
Re: Sega Aero and Cave SH3
i`ll check asap.
i have tested a few more games , from Atomiswave to Snk vs Capcom Chaos pcb , everything works fine.
and muchi works fine on the Blasts and the Egrets.
odd...
i have tested a few more games , from Atomiswave to Snk vs Capcom Chaos pcb , everything works fine.
and muchi works fine on the Blasts and the Egrets.
odd...
ain't got no realestateorjewelryoranyofthat