Weche Ok Baby/Irem Madonna marquee holder dimensions
- FrancoB
- J+ member of the year finalist!
- Posts: 4758
- Joined: June 8th, 2009, 10:42 pm
- Location: Oxfordshire
- eBay: francosquashking
- Initials: FRN
Weche Ok Baby/Irem Madonna marquee holder dimensions
I'm looking for the dimensions for the Weche Ok Baby and Irem Madonna marquee holders. If anyone has either or both of these and can supply the dimensions I would be very grateful and I will make it worth your while.
Thx
Thx
- FrancoB
- J+ member of the year finalist!
- Posts: 4758
- Joined: June 8th, 2009, 10:42 pm
- Location: Oxfordshire
- eBay: francosquashking
- Initials: FRN
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
Actually, looks like the Ok baby is sorted so just after the Irem Madonna if possible.
Thank you please
Thank you please
-
- Posts: 167
- Joined: August 19th, 2008, 10:03 pm
- Location: Spain
- eBay: jandrogo
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
Hi FrancoB,
I have an original Irem Madonna Marquee (at least I believe it.. ), if I have some free time I'll take measures tonight or tomorrow afternoon
I have an original Irem Madonna Marquee (at least I believe it.. ), if I have some free time I'll take measures tonight or tomorrow afternoon
-
- Posts: 167
- Joined: August 19th, 2008, 10:03 pm
- Location: Spain
- eBay: jandrogo
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
I hope these pics help you. Please tell me any measurements (in cm) you need
Unpacked for first time just for you
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Unpacked for first time just for you
Uploaded with ImageShack.us
Uploaded with ImageShack.us
- FrancoB
- J+ member of the year finalist!
- Posts: 4758
- Joined: June 8th, 2009, 10:42 pm
- Location: Oxfordshire
- eBay: francosquashking
- Initials: FRN
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
Hi Alex, thank you very much for your help
I'll shoot you a PM rather than asking you twenty questions here.
I'll shoot you a PM rather than asking you twenty questions here.
- clintonsayshi
- Posts: 12
- Joined: August 29th, 2022, 12:12 am
- Location: Texas
- eBay: clintonsayshi
- Initials: CDL
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
@FrancoB
Do you happen to know where I can find Marquee Toppers for the Madonna?
Do you happen to know where I can find Marquee Toppers for the Madonna?
- FrancoB
- J+ member of the year finalist!
- Posts: 4758
- Joined: June 8th, 2009, 10:42 pm
- Location: Oxfordshire
- eBay: francosquashking
- Initials: FRN
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
I can't remember seeing any repros for sale recently. I'm not 100% sure if I repro'd these myself in the end
I have kept all of my templates though so if I did make one then I should still be able to get the dimensions. Let me know if that would be of use and I'll have a look through my templates.
I have kept all of my templates though so if I did make one then I should still be able to get the dimensions. Let me know if that would be of use and I'll have a look through my templates.
- clintonsayshi
- Posts: 12
- Joined: August 29th, 2022, 12:12 am
- Location: Texas
- eBay: clintonsayshi
- Initials: CDL
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
@FrancoB I looked at the post before but did not see one. However, if you find it, that would be great to have it.
- FrancoB
- J+ member of the year finalist!
- Posts: 4758
- Joined: June 8th, 2009, 10:42 pm
- Location: Oxfordshire
- eBay: francosquashking
- Initials: FRN
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
Turns out I did:
The one at the top is the original, the other photos are of my repro. The original Is a single piece of thick acrylic with a bent steel back piece that bolts to the top cab and keeps the whole marquee holder in place. I couldn't repro that part to I made mine from two thinner sheets and then made a bracket from aluminium section that bolts to both the marquee holder and the top of the cab.
I've found the template in my stash so I can get the overall dimensions for you. Do you have one of these cabs? If so I could do with a couple of bits of information that I can then add to the drawing for completeness.
The one at the top is the original, the other photos are of my repro. The original Is a single piece of thick acrylic with a bent steel back piece that bolts to the top cab and keeps the whole marquee holder in place. I couldn't repro that part to I made mine from two thinner sheets and then made a bracket from aluminium section that bolts to both the marquee holder and the top of the cab.
I've found the template in my stash so I can get the overall dimensions for you. Do you have one of these cabs? If so I could do with a couple of bits of information that I can then add to the drawing for completeness.
- kazuo
- Posts: 455
- Joined: November 3rd, 2008, 7:18 am
- Location: Phuket
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
Franco, you definitely did! I have two of them, they look fantastic. Thank you for making them and for offering to share that information with people.
- clintonsayshi
- Posts: 12
- Joined: August 29th, 2022, 12:12 am
- Location: Texas
- eBay: clintonsayshi
- Initials: CDL
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
Awesome! @FrancoB
Yes I did have a cabinet. I am new to the board, so i dont think i can message, so maybe you can email me?
Its my username @yahoo.com
Thanks!
Yes I did have a cabinet. I am new to the board, so i dont think i can message, so maybe you can email me?
Its my username @yahoo.com
Thanks!
- FrancoB
- J+ member of the year finalist!
- Posts: 4758
- Joined: June 8th, 2009, 10:42 pm
- Location: Oxfordshire
- eBay: francosquashking
- Initials: FRN
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
Ah, I'm so glad you replied I was trying to think who I made some of these for and my PMs don't back that far.
If it's ok I'll shoot you a PM with a couple of questions around the aluminum L bar as it will be much easier to take dimensions from your part, assuming you still have the cabs/holders.
Hopefully kazou can sort me out with what I need. Once I've got everything I need I'll get it modelled and uploaded.clintonsayshi wrote: ↑August 31st, 2022, 3:39 am Awesome! @FrancoB
Yes I did have a cabinet. I am new to the board, so i dont think i can message, so maybe you can email me?
Its my username @yahoo.com
Thanks!
- clintonsayshi
- Posts: 12
- Joined: August 29th, 2022, 12:12 am
- Location: Texas
- eBay: clintonsayshi
- Initials: CDL
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
@FrancoB
Awesome. Thanks!
Awesome. Thanks!
- kazuo
- Posts: 455
- Joined: November 3rd, 2008, 7:18 am
- Location: Phuket
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
Of course! Whatever you need, just shoot me a PM. I still have the cabs and the marquee holders.FrancoB wrote: ↑August 31st, 2022, 3:50 pmAh, I'm so glad you replied I was trying to think who I made some of these for and my PMs don't back that far.
If it's ok I'll shoot you a PM with a couple of questions around the aluminum L bar as it will be much easier to take dimensions from your part, assuming you still have the cabs/holders.
- clintonsayshi
- Posts: 12
- Joined: August 29th, 2022, 12:12 am
- Location: Texas
- eBay: clintonsayshi
- Initials: CDL
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
I know it has been a few months @FrancoB
Were you able to track down the info for the irem madonna marquees?
Were you able to track down the info for the irem madonna marquees?
- clintonsayshi
- Posts: 12
- Joined: August 29th, 2022, 12:12 am
- Location: Texas
- eBay: clintonsayshi
- Initials: CDL
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
@kazuo Do you have the files on these Irem Madonna ones by chance?
- FrancoB
- J+ member of the year finalist!
- Posts: 4758
- Joined: June 8th, 2009, 10:42 pm
- Location: Oxfordshire
- eBay: francosquashking
- Initials: FRN
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
Yes, kazou kindly supplied me with the dimensions I need.clintonsayshi wrote: ↑March 14th, 2023, 3:54 am I know it has been a few months @FrancoB
Were you able to track down the info for the irem madonna marquees?
Thanks for the nudge, I'll get this finished up later this week.
-
- Posts: 36
- Joined: March 27th, 2018, 6:28 am
- Location: Kapaa Kauai Hawaii
- eBay: Emulat0r
- Initials: RB.
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
@clintonsayshi if you get these made, could you let me know I might want a set of 3 and it could lower your cost if more people got some.
- clintonsayshi
- Posts: 12
- Joined: August 29th, 2022, 12:12 am
- Location: Texas
- eBay: clintonsayshi
- Initials: CDL
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
@FrancoB
No rush, but thank you for doing this.
No rush, but thank you for doing this.
- clintonsayshi
- Posts: 12
- Joined: August 29th, 2022, 12:12 am
- Location: Texas
- eBay: clintonsayshi
- Initials: CDL
Re: Weche Ok Baby/Irem Madonna marquee holder dimensions
Will keep you in the loop, thanks!8bitforlife wrote: ↑March 30th, 2023, 8:45 pm @clintonsayshi if you get these made, could you let me know I might want a set of 3 and it could lower your cost if more people got some.