Auto fire
-
- Posts: 125
- Joined: October 19th, 2020, 10:47 am
- Location: Uk
- eBay: Camp-dea
Auto fire
Hi,what you guys using for auto fire?basicaly I want to wire a button for autofire but whilst using another button for normal fire,I was thinking of some kind of repeater then wire it in parallel with normal button.any ideas
- emphatic
- Breastfeeds when required
- Posts: 5874
- Joined: April 7th, 2009, 4:14 pm
- Location: Alingsås, Sweden
- eBay: jorgen_sjolander
- Initials: JOR
Re: Auto fire
https://wiki.arcadeotaku.com/w/Passive_Autofire or a RECO PCB if you can get your hands on one.
My games: http://www.emphatic.se
-
- Posts: 125
- Joined: October 19th, 2020, 10:47 am
- Location: Uk
- eBay: Camp-dea
Re: Auto fire
Reco seems hard to find,wonder if they gonna make a new batch
- Codiene
- Posts: 22
- Joined: November 27th, 2020, 6:46 pm
- Location: Somewhere, UK
- eBay: ebayID
- Initials: AAS
Re: Auto fire
Lolz was just looking around on the site and spotted this. I was intending to do exactly the same as you say for shmups without hold to fire but can’t use regular turbo fire because there is a charge shot.
emphatic helpfully put me on to this circuit elsewhere but my soldering skills really suck, I tried and got pee’d off with myself and the crap job I was doing. I am going to use ‘breadboard’ to build a solderless version of this circuit but waiting for the breadboard to arrive. I’ll probably put it in a project box once complete to protect it.
It apparently works better with a 470nF capacitor off pin 4 from the hex converter.
http://ikotsu.blogspot.com/2010/03/pass ... t.html?m=1
I can’t confirm at the moment because it haven’t completed it and I really hope it works in the PS3 Tekken donor stick I’m intending to use.
emphatic helpfully put me on to this circuit elsewhere but my soldering skills really suck, I tried and got pee’d off with myself and the crap job I was doing. I am going to use ‘breadboard’ to build a solderless version of this circuit but waiting for the breadboard to arrive. I’ll probably put it in a project box once complete to protect it.
It apparently works better with a 470nF capacitor off pin 4 from the hex converter.
http://ikotsu.blogspot.com/2010/03/pass ... t.html?m=1
I can’t confirm at the moment because it haven’t completed it and I really hope it works in the PS3 Tekken donor stick I’m intending to use.