Chewlix C (Chinese Vewlix Capcom)

Arcade cabinet hardware and accessories
Forum rules
ArcadeOtaku forum introduction & rules
mRCaESaR
Posts: 22
Joined: August 21st, 2017, 8:42 am
Location: Sydney
eBay: mr_caesar81
Initials: JTL

Re: Chewlix C (Chinese Vewlix Capcom)

Postby mRCaESaR » November 16th, 2017, 1:34 pm

OLDBYTE wrote:Great thread on the CHEWLIX cabs. We bought one here in Australia, knowing we would never get an original Vewlix Street Fighter cab. Brand new $1700 AUD. We are running an original Super Street Fighter 4 arcade edition Namco unit in it. (Purchased in Japan ) We had a local company reproduce some artwork. The cab looks and runs great. Everyone loves the cab and it is one of our fav. We added red Led lights and I made a matching Street Fighter stool


Yep. Please by all means. Add to the thread. I'd like this to be a pretty source of info thread too.

I'm getting my second one for 1.6k AUD, the first one was 1.2k, so at 2.8k, I'm very happy to have 2 in a 1p configuration :D :D

Was the conversion from jamma to jvs easy? I thought about getting a taito type x2 board, but I honestly didn't see a need.

I think I'll just slap a gtx 1050 ti low profile on my Dell optiplex 990 i5 with 8gb ram and be done with a very capable hyperspin pc with taito type x2 emulation.

Carson is also doing my side panels :D :D (I know he did yours as I saw your post on the vewlix thread on Aussie Arcade :D )

Your cabs look great with the LEDs. Do you run an arcade or something?

Btw.. A couple of things

1. where did you get your marquee from? I'm wanting to get a set for mine.
2. Do you know if you can rotate your monitor? Itd be great if you can post pics of the back of your cab without the black panel on, Is'm interested to see how other cabs vary and differ from mine.
3. Where can I get those stools from? :D they've got a Chinese vewlix, why not have a Chinese Vewlix stool? I want the sega/taito chairs but don't really want to pay over 200 AUD for om.
User avatar
OLDBYTE
Posts: 21
Joined: November 15th, 2017, 11:56 am
Location: Australia
eBay: tackandh
Initials: RNB

Re: Chewlix C (Chinese Vewlix Capcom)

Postby OLDBYTE » November 17th, 2017, 11:43 am

Hi, I should have paid more attention to your location. Here I am talking about Australia and you live just 3 kangaroo hops away. I will try to answer your questions. I don't run an Arcade centre, just a private collector. I do the hobby with my son and together we restore whatever cabs come along that interest us. I must say it's got a bit out of control. But hey, we could be doing worse things. I connected the Namco unit up via a Capcom I/O board, kick harness etc. Simple and works great. (see last pic) The marquees I made myself. I can send you the sizes. I got my local Perspex guy to cut 2 panels, one clear and the back one red. Just found some nice bolts and there you have it. I purchased the marquee artwork from Japan and it is original. The stools are the Highway Entertainment cheap $55 ones. I am an Upholsterer by trade, so I recovered the tops. I will take some pics of the back of the cab when I get a chance. Also a pic of the Blazblue cab . I hope that helps.
DSC02229.JPG
DSC01944.JPG
DSC02245.JPG
mRCaESaR
Posts: 22
Joined: August 21st, 2017, 8:42 am
Location: Sydney
eBay: mr_caesar81
Initials: JTL

Re: Chewlix C (Chinese Vewlix Capcom)

Postby mRCaESaR » November 20th, 2017, 4:56 am

OLDBYTE wrote:Hi, I should have paid more attention to your location. Here I am talking about Australia and you live just 3 kangaroo hops away.


Hahah yeah, maybe not 3 hops away, but close compared to the other side of the world :D

OLDBYTE wrote:I don't run an Arcade centre, just a private collector. I do the hobby with my son and together we restore whatever cabs come along that interest us.


Fair enough. Like me. I don't do any restorations, but I have built bar tops. I'm tempted to go "hunting" for an Astro City cabinet and put a Jamma setup in that... Just don't want to spend any more than what I would for a HD setup.

OLDBYTE wrote:I must say it's got a bit out of control. But hey, we could be doing worse things.


Nah, there's only a few cabs there ;) :D

Out of control would be 2x 1 player setups for fighting games, 2x 1p setups for SHMUPS and 2x 1p setups for Jamma lol

I'm going a bit crazy, I'll have 2x Chewlix setups by the end of the week, a 2p bartop and a 1p vertical bartop lol - still want an astro city though haha.

OLDBYTE wrote:I connected the Namco unit up via a Capcom I/O board, kick harness etc. Simple and works great. (see last pic)


Don't think I'll go down the path of getting a taito type x2 board. I'll stick to a PC.

OLDBYTE wrote:The marquees I made myself. I can send you the sizes. I got my local Perspex guy to cut 2 panels, one clear and the back one red. Just found some nice bolts and there you have it.


How much did that end up costing you? The only place I could find the perspex is from Europe and they're wanting pretty much 100 Euro to send over to AU - I think that's a bit too much for my liking :)

http://www.shadaloo.eu/index.php?route= ... uct_id=229

I'd be interested how you made this.

OLDBYTE wrote:I purchased the marquee artwork from Japan and it is original.


I'm sure this part will be easy.. Carson will most likely be able to fix me up for this, and there's sellsellsell2000 that has a large range of artwork that he could help me out with.

OLDBYTE wrote:The stools are the Highway Entertainment cheap $55 ones. I am an Upholsterer by trade, so I recovered the tops. I will take some pics of the back of the cab when I get a chance. Also a pic of the Blazblue cab . I hope that helps.


I've seriously thought about getting these ones from highway, but I'm looking for ones that are from a Bricks and Mortar just so I don't have to pay shipping lol.

Helps that you're an upholster, by the time I look into "customising" a stool eg. a SFV logo or something, after paying an upholsters labour, materials and the chair itself, I may as well get a Taito one (it'll only set me 300 Euro :lol: :lol: :lol: )
mRCaESaR
Posts: 22
Joined: August 21st, 2017, 8:42 am
Location: Sydney
eBay: mr_caesar81
Initials: JTL

Re: Chewlix C (Chinese Vewlix Capcom)

Postby mRCaESaR » November 20th, 2017, 11:51 am

It's been a while since I made any progress :)

I had an idea of making a "Y" harness so I could have both the Brook UFB and Jamma harnesses plugged into the controller.

Image

Image

Unfortunately, the idea was great in theory, but for some reason (and I still can't figure out why), when both UFB and Jamma are connected, it absolutely acts up even though only one is powered. Directional movements don't work, it registers all 4 directions, I get stuck holding down etc - and this occurs both on PS4 and on the Pandora. So that harness was quickly scratched! :lol:

Now onto the following night after my Y harness fail..

Since I didn't like the UFB exposed, I went to the local electrical shop and found a decent sized PCB enclosure. A couple of holes later, some reverse tape and some wire wrapping, I found myself a nice decent enclosure for the UFB

Image

Image

Image

Now for the weekend "clean up".

In preparation of the second cabinet being delivered this week, I needed to make the "host" cabinet tidy and roomy so I can have the Jamma and PS4 setup nicely.

I rewired the Pandora to take up all the space on the top shelf and put it down on the bottom shelf.

Image

I shifted the power supply from having the terminals at the front to the back (just in case I have the front panel removed and the kids or I don't accidentally kick the power supply touching the 240v wires - not really keen on getting electrocuted whilst playing Street Fighter :D), I also re-worked the harness and all its respective cables so it all fits nicely on the bottom shelf.

Image

After shifting the wiring around and tidying up, I realised there's plenty of room and the only thing I could think of was a PC setup (I know I had plans of doing this, but I didn't realise it'd be this quick! I didn't plan on installing a PC setup immediately - that was more a phase 2 or even 3 - but now, I'm looking at a hyperspin setup, plus there's a number of great SHMUPS available on the PC).

Image

Today's events included getting delivery of the vinyl and a new graphics card!

A few posts ago, I stated I ordered vinyl from a local printer to replicate the Vewlix Decals. Today I received them and they're far beyond my expectations!

THEY ARE AWESOME!!!

Side panels removed

Image

Had to apply the vinyl via the "wet method". So runny soapy water it is!!

Image

Image

Vinyl applied and waiting for it to settle a little..

Image

I was a little impatient and removed the top film off because I just couldn't wait!!

Image

Both sides with their vinyls applied

Image

A closer look (bubbles still exist at this point as it hasn't fully settled and I haven't rubbed it off yet)

Image

As part of the package, I also got some CP vinyls. You can't have a vewlix without the 100 yen sticker!! :) :D :D

Image

Again, I was being impatient, I really should've waited overnight, but I just couldn't help myself!

Side panels connected back to the main cabinet.

Image

Finally, the GFX card I ended up getting was the GTX 1050 low profile - it's the best card I can get for the Dell 990 Optiplex since it's low profile and it doesn't need external power. I initially had plans on getting the Ti version, but I just didn't want to spend the money :lol:

Image

She's fits nice and snug in the Optiplex!

Image

Hopefully the next update will be when the second cabinet arrives!
mRCaESaR
Posts: 22
Joined: August 21st, 2017, 8:42 am
Location: Sydney
eBay: mr_caesar81
Initials: JTL

Re: Chewlix C (Chinese Vewlix Capcom)

Postby mRCaESaR » November 21st, 2017, 12:35 am

mRCaESaR wrote:Hopefully the next update will be when the second cabinet arrives!


Looks like a lot can happen in 12 hours! :(

I was expecting my delivery tomorrow, but the seller has told me the cabinet had been "incorrectly" labelled and has already been sold after I paid a deposit!

Not happy at all!

Need to look at importing costs from Alibaba
User avatar
OLDBYTE
Posts: 21
Joined: November 15th, 2017, 11:56 am
Location: Australia
eBay: tackandh
Initials: RNB

Re: Chewlix C (Chinese Vewlix Capcom)

Postby OLDBYTE » November 23rd, 2017, 12:20 pm

Is Carson doing a control panel overlay for you?

Re the stools. I can make covers for you. Would be about $30 including logo. All you would have to do is fit the covers and staple off around the bottom.
asset.jpg
mRCaESaR
Posts: 22
Joined: August 21st, 2017, 8:42 am
Location: Sydney
eBay: mr_caesar81
Initials: JTL

Re: Chewlix C (Chinese Vewlix Capcom)

Postby mRCaESaR » November 23rd, 2017, 11:30 pm

Nah, haven't asked Carson to do the CP overlay. I don't think I want to since my marquee isn't the Vewlix C style, only the L. I'd prefer to match the Marquee matching the CP.

Re: stool - I'll hit you up once I have my second cabinet.
mRCaESaR
Posts: 22
Joined: August 21st, 2017, 8:42 am
Location: Sydney
eBay: mr_caesar81
Initials: JTL

Re: Chewlix C (Chinese Vewlix Capcom)

Postby mRCaESaR » November 27th, 2017, 1:03 pm

The Chewlix adventures continues! :)

After my failed "tate" attempt of the Chewlix, a fellow shmups player provided some details on how he rotated his Vewlix. It turns out, I required additional brackets to turn the Chewlix into a vertical shmups cab

https://imgur.com/a/VZeNx

Once I received the pictures, I contacted a number of retailers on Alibaba. Enter Potech Technology who were up for the challenge - I had no idea how to explain that I didn't buy the cabinet from them, but was wondering if they sold these particular brackets to rotate a cabinet :)

The parts were sent on Friday, and today the following showed up at work

Image

I have no idea what the little tiny one is used for??

Image

Took the monitor and bezel out and the first bracket fits like in the "Chinese Vewlix L TATE gallery" - signs look good!

Image

Removed the brackets for the normal position and installed the Tate brackets

Image

All 4 brackets installed and the metal plates are also removed..

Image

Monitor fits like a glove in the tate position!!

Image

Booted up an old pc, and she's working just fine, albeit in the horizontal position

Image

Played around with portrait settings and we were back in business!!

Image

Nothing like some Crimzon Clover to test out the new Tate Chewlix!!

Image

Excuse the video work, I'm obviously far from your average youtuber who knows how to record properly :)



Like all shmups games for me, I quickly see this screen too often

Image

That's the latest on the tate chewlix.

In other news, I'm in the process of finalising my order from Alibaba in ordering another cabinet! Until then.
SpaceGod
Posts: 3
Joined: May 26th, 2017, 2:56 pm
Location: United States

Re: Chewlix C (Chinese Vewlix Capcom)

Postby SpaceGod » January 4th, 2018, 10:03 am

hey guys cool stuff you're doing but i have a question.

i was planing on getting a Chewlix but i'm in Arkansas show there is no market for it and cant find it anywhere.
then i was checking out Alibaba and saw that there are Chinese arcade companies selling them. so i got in contact with one of there reps and they said i can get one for 450USD and 530USD sea and ground.

but what i was wondering if this sounds correct? and if anyone here has dealt with Alibaba. is there anything i need to worry when using the site?
mRCaESaR
Posts: 22
Joined: August 21st, 2017, 8:42 am
Location: Sydney
eBay: mr_caesar81
Initials: JTL

Re: Chewlix C (Chinese Vewlix Capcom)

Postby mRCaESaR » January 4th, 2018, 10:32 am

My second one cost 550 USD but it's your shipping that will cost an arm and a leg.

Brokerage fees, customs, port fees etc is costing me around 720 USD (not sure about duty as of yet as I'm still waiting for my second one). My shipping is to Australia, so shipping to you might be a lot more expensive

I went with a door to door service for my second cab so it probably cost a little more than what it would've cost me to do myself but I'll gladly pay the extra as I couldn't spend the time in researching and finding quotes.
Jump
Posts: 7
Joined: October 21st, 2017, 5:40 am
Location: Earth, area commonly referred to as Canada.
eBay: NoobRoller

Re: Chewlix C (Chinese Vewlix Capcom)

Postby Jump » January 8th, 2018, 7:14 pm

SpaceGod wrote:hey guys cool stuff you're doing but i have a question.

i was planing on getting a Chewlix but i'm in Arkansas show there is no market for it and cant find it anywhere.
then i was checking out Alibaba and saw that there are Chinese arcade companies selling them. so i got in contact with one of there reps and they said i can get one for 450USD and 530USD sea and ground.

but what i was wondering if this sounds correct? and if anyone here has dealt with Alibaba. is there anything i need to worry when using the site?



I don't think thats quite accurate, importing these things has a dozen fees.

Manufacturing cost.
Shipping to NA port.
Document transfer fee.
Security Fee.
Taxes/Duties
Broker fee.
Warehouse storage fee
Freight forwarding fee.
Lift gate fee for the delivering truck.
Delivery to your house from port.
Currency exchange.
Money wiring fee.
SpaceGod
Posts: 3
Joined: May 26th, 2017, 2:56 pm
Location: United States

Re: Chewlix C (Chinese Vewlix Capcom)

Postby SpaceGod » January 12th, 2018, 4:41 am

thats for letting me know i just wanted to make sure

Return to “Cabinet Q&A”



Who is online

Users browsing this forum: No registered users