Espgaluda (PCB)

Post your high scores here!
Forum rules
ArcadeOtaku forum introduction & rules
User avatar
emphatic
Breastfeeds when required
Posts: 6958
Joined: April 7th, 2009, 4:14 pm
Location: Alingsås, Sweden
eBay: jorgen_sjolander
Initials: JOR

Re: Espgaluda (PCB)

Postby emphatic » December 29th, 2012, 10:15 pm

Chempop wrote:I am used to playing the PS2 and 360 ports of ESPG1+2 with the following config:
1: Laser
2: Kakusei
3: Rapidfire
4: Shield-barrier

Are the PCB's 4 button default? If so, I'm guessing 2+4 would be switched because 2 usually = bomb.


Yes, both are 4 button games. Holding C+D while starting ESPGALUDA (PCB) will let you have

A: Shot/Laser
B: Kakusei
C: Rapid fire
D: Barrier

In ESPGALUDA II, you get to choose the layout at the start of each credit (Barrier/Full Auto buttons).
User avatar
loopyeddie
Posts: 16
Joined: October 22nd, 2012, 5:02 am
Location: Omaha

Re: Espgaluda (PCB)

Postby loopyeddie » April 6th, 2013, 4:42 am

loopyeddie - ED - 27,425,800 - ALL
Ageha

Image
User avatar
moh
Posts: 140
Joined: August 24th, 2012, 5:02 pm
Location: Toronto, Canada

Re: Espgaluda (PCB)

Postby moh » April 10th, 2013, 5:34 am

Image

getting close to that 1CC!

moh - moh - 17,997,190 - 5 - Tateha
User avatar
moh
Posts: 140
Joined: August 24th, 2012, 5:02 pm
Location: Toronto, Canada

Re: Espgaluda (PCB)

Postby moh » April 14th, 2013, 3:08 am

Image

finally got the clear! I'm so excited :D

moh - MOH - 22,426,990 - ALL - Ageha
User avatar
ikaruga007
Posts: 320
Joined: May 12th, 2010, 2:01 pm
Location: Stockholm, Sweden
eBay: dex511
Initials: PJN

Re: Espgaluda (PCB)

Postby ikaruga007 » April 14th, 2013, 3:27 am

Congrats! Great work!
User avatar
moh
Posts: 140
Joined: August 24th, 2012, 5:02 pm
Location: Toronto, Canada

Re: Espgaluda (PCB)

Postby moh » April 14th, 2013, 4:23 am

thanks a lot :awe:

It was a hilarious run, I died twice at stage 2, then decided to keep going just for the practice. Ended up clearing it :lol:
User avatar
Rossyra
Supermod
Posts: 9376
Joined: February 12th, 2009, 1:24 am
Location: UK

Re: Espgaluda (PCB)

Postby Rossyra » April 14th, 2013, 7:43 am

Nice top 10 score moh, congratulations! :awe:
Image
User avatar
ikaruga007
Posts: 320
Joined: May 12th, 2010, 2:01 pm
Location: Stockholm, Sweden
eBay: dex511
Initials: PJN

Re: Espgaluda (PCB)

Postby ikaruga007 » April 14th, 2013, 10:18 am

moh wrote:It was a hilarious run, I died twice at stage 2, then decided to keep going just for the practice. Ended up clearing it :lol:

Yeah, I wonder how many good runs are missed because of restart syndrome.
User avatar
emphatic
Breastfeeds when required
Posts: 6958
Joined: April 7th, 2009, 4:14 pm
Location: Alingsås, Sweden
eBay: jorgen_sjolander
Initials: JOR

Re: Espgaluda (PCB)

Postby emphatic » April 14th, 2013, 11:34 am

Congrats on the clear! I remember my first ESPGALUDA clear like it was yesterday. Adrenaline! :awe:
User avatar
moh
Posts: 140
Joined: August 24th, 2012, 5:02 pm
Location: Toronto, Canada

Re: Espgaluda (PCB)

Postby moh » April 14th, 2013, 12:19 pm

What made it so much more exhilarating, was that I wasn't playing by myself in a quiet environment, with no distraction. All sorts of family was over visiting, kids were screaming, there was smoke in the air, my brothers were on the blast city right next to me button mashing away at Marvel vs Capcom. I had all the distractions in the world, just like the real arcade experience. But being able to tune it all out just for that last pattern (damn that last pattern) was tough.

...and that is why this clear is more valuable to me then some kid whos sitting in his room, playing galuda in silence on his mame setup :awe:
User avatar
ikaruga007
Posts: 320
Joined: May 12th, 2010, 2:01 pm
Location: Stockholm, Sweden
eBay: dex511
Initials: PJN

Re: Espgaluda (PCB)

Postby ikaruga007 » April 14th, 2013, 12:29 pm

moh wrote:...and that is why this clear is more valuable to me then some kid whos sitting in his room, playing galuda in silence on his mame setup :awe:

Call me weird but I find most of my clears more valuable to me than some kid playing MAME. :lol:
User avatar
emphatic
Breastfeeds when required
Posts: 6958
Joined: April 7th, 2009, 4:14 pm
Location: Alingsås, Sweden
eBay: jorgen_sjolander
Initials: JOR

Re: Espgaluda (PCB)

Postby emphatic » April 14th, 2013, 12:30 pm

^^This is similar to how I got my first clear too. Both daughters were in the same room, screaming and playing. And I'm very easily distracted, so I was kinda amazed I did clear the game with all that racket going on. :D The last pattern is tough, I always use barrier bursts when I get in trouble (make sure not to hit the cube with 'em though) and it's a lot easier.
User avatar
moh
Posts: 140
Joined: August 24th, 2012, 5:02 pm
Location: Toronto, Canada

Re: Espgaluda (PCB)

Postby moh » April 22nd, 2013, 4:40 am

Managed to clear galuda with 3 lives left. its more and more fun every time I play it :D

Image

moh - MOH - 27,529,720 - ALL - Ageha

movin on up :awe:
User avatar
wonderbanana
You can't polish a turd, but I can
Posts: 1063
Joined: January 16th, 2011, 2:57 pm
Location: Herts, UK

Re: Espgaluda (PCB)

Postby wonderbanana » April 22nd, 2013, 10:34 am

:clap:
markedkiller78 wrote:that's probably my best contribution to the forum to date "I am pluralising fanny"
User avatar
Chempop
Posts: 1078
Joined: May 13th, 2011, 6:13 pm
Location: North East USA
eBay: Weegzon
Initials: GLX

Re: Espgaluda (PCB)

Postby Chempop » April 24th, 2013, 5:42 pm

kids were screaming, there was smoke in the air


:clap:

Seriously though, congrats on the clear - and good luck breaking 30mil.
User avatar
moh
Posts: 140
Joined: August 24th, 2012, 5:02 pm
Location: Toronto, Canada

Re: Espgaluda (PCB)

Postby moh » April 24th, 2013, 9:11 pm

Chempop wrote:
kids were screaming, there was smoke in the air


:clap:

Seriously though, congrats on the clear - and good luck breaking 30mil.


thanks chempop, now that I can consistently clear it, I'm gonna work on scoring 8-)
User avatar
moh
Posts: 140
Joined: August 24th, 2012, 5:02 pm
Location: Toronto, Canada

Re: Espgaluda (PCB)

Postby moh » May 24th, 2013, 3:10 am

FINALLY BROKE 30MIL :D

Image

moh - MOH - 30,497,810 - ALL - Ageha

not the highest score on my own scoreboard unfortunately :cry:
User avatar
OlDirty
Posts: 269
Joined: January 12th, 2015, 8:26 pm
Location: Switzerland

Re: Espgaluda (PCB)

Postby OlDirty » May 10th, 2015, 6:59 pm

OlDirty - RWI - 16'904'930 - 5

My highest score yet, but i'm a shmup noob. So it's ok for me :awe:

Image
User avatar
theMot
Posts: 69
Joined: May 24th, 2013, 12:59 am
Location: Sydney, Australia

Re: Espgaluda (PCB)

Postby theMot » September 20th, 2015, 10:42 am

A bit late to the party :D Just started playing this one. How do you get the life on level 3?
User avatar
emphatic
Breastfeeds when required
Posts: 6958
Joined: April 7th, 2009, 4:14 pm
Location: Alingsås, Sweden
eBay: jorgen_sjolander
Initials: JOR

Re: Espgaluda (PCB)

Postby emphatic » September 20th, 2015, 10:57 am

theMot wrote:A bit late to the party :D Just started playing this one. How do you get the life on level 3?


You have to be in Kakusei mode to enable the hitbox of the thing you blast it out of.

Return to “High Scores”



Who is online

Users browsing this forum: No registered users