Im atrying to connect my Type X to my naomi cab and I get no signal, does the type X automaitcally scales to 480p or do I need to do anything? Also, the board has 4 usb port and one that says jamma, which one is for the dongle and which for the JVS usb cable?
Thanks!
Raiden IV Type X in a Naomi
-
- Posts: 674
- Joined: February 18th, 2015, 12:03 am
- Location: Metro City
- eBay: jaime5171
- mufunyo
- Posts: 648
- Joined: August 21st, 2008, 12:26 am
- Location: Eindhoven, NL
- eBay: mufunyo
- Initials: MUF
Re: Raiden IV Type X in a Naomi
The white DVI port is 480p/31KHz, the blue VGA port is 480i/15KHz. You must connect the cab's JVS to the port marked JVS only. Any of the free USB ports can be used for the dongle.
-
- Posts: 674
- Joined: February 18th, 2015, 12:03 am
- Location: Metro City
- eBay: jaime5171
Re: Raiden IV Type X in a Naomi
I only have 4 USB and one extra that says jamma. Should it show image even without the JVS IO connected? Shouldnt DVI be 720p?
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Raiden IV Type X in a Naomi
Type X doesn't support 720p. DVI connector outputs 31khz and DE15 / "VGA" connector 15khz, as has been mentioned.
The JVS IO doesn't have to be connected to get video out of it. The JVS connector does indeed say Jamma.
The JVS IO doesn't have to be connected to get video out of it. The JVS connector does indeed say Jamma.
-
- Posts: 674
- Joined: February 18th, 2015, 12:03 am
- Location: Metro City
- eBay: jaime5171
Re: Raiden IV Type X in a Naomi
Ok, just resitted the cards and all working properly now, thanks!