Initial D 3 Volume

PCB problems and fixes
Post Reply
mickyc22
Posts: 3
Joined: May 16th, 2020, 10:58 pm
Location: Newcastle
eBay: mickyc22
Initials: mac

Initial D 3 Volume

Post by mickyc22 »

Im after some advice on ID3
i dont have the service board/coin tower so manually attempting to wire up the external harness, and i know the wires marked up below go to the external harness.
I've worked out the service/test and degauss switches
but im struggling on the volume, i can get the front and rear speakers working but only on full blast, even with a pot wired to them, can anyone assist me in how to wire them up so they can be adjusted, i've done this before on the like of Daytona etc with no trouble but i just cant figure out how on this.

Image

I notice mine is wired different to anothe i saw on a youtube clip
Image
and im also missing the 2 jumper settings that one has

Many thanks
User avatar
geotrig
Potato!
Posts: 6809
Joined: December 5th, 2008, 1:14 pm
Location: ._.
eBay: ._.

Re: Initial D 3 Volume

Post by geotrig »

Ight be some info in thread linked to below, I know I separated mine out and got rid of the credit donkeys ago so it can't have been that hard
viewtopic.php?f=3&t=21059
Image

<trk>:I remember catching a big fat one and my friend said "throw it back in, that one already tastes like wood"
Genma
Posts: 8
Joined: October 11th, 2020, 10:19 pm
Location: Canada
eBay: aoig-61

Re: Initial D 3 Volume

Post by Genma »

Heres some photos from my ID3 Machine Hope it helps.

Master Cab
Master Cab
Master Cab
Master Cab
Master Cab
Slave Cab
Slave Cab
Slave Cab
Genma
Posts: 8
Joined: October 11th, 2020, 10:19 pm
Location: Canada
eBay: aoig-61

Re: Initial D 3 Volume

Post by Genma »

Slave Cab
PXL_20201014_025629318.jpg
Panel that would be inside the coin box.
PXL_20201014_024905204.jpg
PXL_20201014_024855297.jpg
Genma
Posts: 8
Joined: October 11th, 2020, 10:19 pm
Location: Canada
eBay: aoig-61

Re: Initial D 3 Volume

Post by Genma »

PXL_20201014_024901151.jpg
mickyc22
Posts: 3
Joined: May 16th, 2020, 10:58 pm
Location: Newcastle
eBay: mickyc22
Initials: mac

Re: Initial D 3 Volume

Post by mickyc22 »

Many thanks, i notice your master has 2 jumpers but your slave doesnt, also i assume you have 2 separate control panels, may i ask do you know the value of your pot?
Genma
Posts: 8
Joined: October 11th, 2020, 10:19 pm
Location: Canada
eBay: aoig-61

Re: Initial D 3 Volume

Post by Genma »

mickyc22 wrote:
October 15th, 2020, 11:15 pm
Many thanks, i notice your master has 2 jumpers but your slave doesnt, also i assume you have 2 separate control panels, may i ask do you know the value of your pot?
Yes each machine has its own control panel. Without it no sound will come out of the speakers. the pot is B5K 10k
Post Reply