Hi there guys.
I have a problem to boot this pcb arcade game.
When I plugged it , I get this error : " Volume Error ".
Konami Over drive Volume error
- gnomx
- Please Continue...
- Posts: 196
- Joined: October 8th, 2013, 9:12 pm
- Location: 26
- eBay: Cuccion
- Initials: DED
- Contact:
- Zebius
- Posts: 16
- Joined: September 16th, 2015, 10:49 pm
- Location: Italy
Re: Konami Over drive Volume error
This game uses a steering wheel (connected to a potentiometer).
During the boot sequence the wheel should be in the resting/middle position, so you have to adjust the potentiometer until the "volume" is equal to 80.
During the boot sequence the wheel should be in the resting/middle position, so you have to adjust the potentiometer until the "volume" is equal to 80.
- gnomx
- Please Continue...
- Posts: 196
- Joined: October 8th, 2013, 9:12 pm
- Location: 26
- eBay: Cuccion
- Initials: DED
- Contact:
Re: Konami Over drive Volume error
Ok , where is located this trimmer?
I don't have a steering wheel to do it.
- Zebius
- Posts: 16
- Joined: September 16th, 2015, 10:49 pm
- Location: Italy
Re: Konami Over drive Volume error
You can download the manual/wiring diagram from this page:
https://www.arcade-museum.com/game_deta ... me_id=8944
https://www.arcade-museum.com/game_deta ... me_id=8944
- gnomx
- Please Continue...
- Posts: 196
- Joined: October 8th, 2013, 9:12 pm
- Location: 26
- eBay: Cuccion
- Initials: DED
- Contact:
Re: Konami Over drive Volume error
I've install a potentiometer 2kohm and now works.Zebius wrote: ↑January 24th, 2020, 5:28 am You can download the manual/wiring diagram from this page:
https://www.arcade-museum.com/game_deta ... me_id=8944