Hi there guys.
Today I found a great PCB game from Konami : Metamorphic Force!!!
I came back home and , once i've connected to Super gun , first I got a Red screen and , after that i got black screen... I'm Filling bad about it ...
So here some pics :
Metamorphic Force Black Screen
- gnomx
- Posts: 196
- Joined: October 8th, 2013, 9:12 pm
- Location: 26
- eBay: Cuccion
- Initials: DED
- Contact:
- rugdoctor
- Please Continue...
- Posts: 609
- Joined: June 23rd, 2010, 5:45 am
- Location: New Zealand, Wellington
- Initials: KLM
- Contact:
Re: Metamorphic Force Black Screen
Check if there is any bridging on the solder side of the PCB
my website: http://kelvinsgamingheaven.blogspot.co.nz/" onclick="window.open(this.href);return false;
- gnomx
- Posts: 196
- Joined: October 8th, 2013, 9:12 pm
- Location: 26
- eBay: Cuccion
- Initials: DED
- Contact:
Re: Metamorphic Force Black Screen
Hi bro. I've checked and I had not foud any bridging at the solder side...
As well as i need to know which is the version board , EU/Japanese/US because i can retrive this information from the stickers on eeprom...
Cheers.
As well as i need to know which is the version board , EU/Japanese/US because i can retrive this information from the stickers on eeprom...
Cheers.
- XtraSmiley
- Posts: 16
- Joined: September 15th, 2018, 7:50 pm
- Location: Washington DC
- eBay: netrunner 2
- Initials: ACE
Re: Metamorphic Force Black Screen
Hi, where did you "find" it? Like did you buy it working or not?
It is a GREAT game so good find, hopefully you can get it working. I have a working board, so I would be happy to provide pictures or any help I can from across the pond.
It is a GREAT game so good find, hopefully you can get it working. I have a working board, so I would be happy to provide pictures or any help I can from across the pond.
- cthulhu
- Posts: 251
- Joined: October 31st, 2008, 9:10 pm
- Location: The Netherlands
- eBay: cthulhu_nl
- Initials: RIP
Re: Metamorphic Force Black Screen
I have no idea if it will help you figure out what region PCB you have, but here's a picture of my Japanese version:
-
- Posts: 162
- Joined: March 6th, 2013, 5:38 pm
- Location: France
Re: Metamorphic Force Black Screen
1/ Check your 5V voltage, it should be between 4,80V and 5,15V.
2/ Dump the main program eprom with the sticker removed if you can.
If all above is OK it looks like RAM issue.
2/ Dump the main program eprom with the sticker removed if you can.
If all above is OK it looks like RAM issue.