Page 1 of 1
34 position Hirose kick connector
Posted: July 3rd, 2018, 5:44 pm
by erzane
Since I'm loolking for this connector, I found this:
https://www.digikey.ch/product-detail/f ... -ND/558529
Is it the correct one (positions aren't correct but it should be the same serie, I guess..)?
Thanks
Re: 34 position Hirose kick connector
Posted: July 3rd, 2018, 7:53 pm
by nem
Correct for what? What are you going to use it for?
Re: 34 position Hirose kick connector
Posted: July 3rd, 2018, 9:13 pm
by erzane
nem wrote:Correct for what? What are you going to use it for?
Kick harness CPS2
Re: 34 position Hirose kick connector
Posted: July 4th, 2018, 10:33 am
by nem
Re: 34 position Hirose kick connector
Posted: July 4th, 2018, 2:07 pm
by leonardoliveira
That looks exactly like my CPS2/CPS3 kick harness... So I suppose the positions are actually right, too.
Re: 34 position Hirose kick connector
Posted: July 4th, 2018, 3:24 pm
by rodwod
Re: 34 position Hirose kick connector
Posted: July 4th, 2018, 4:45 pm
by leonardoliveira
My kick harness connector is actually Hirose. Has "HRS" marked on a corner.
Re: 34 position Hirose kick connector
Posted: July 4th, 2018, 5:47 pm
by phillv85
They're definitely Hirose, I've made dozens of them.
Re: 34 position Hirose kick connector
Posted: July 4th, 2018, 7:03 pm
by rodwod
phillv85 wrote:They're definitely Hirose, I've made dozens of them.
Sure but the jst one should fit perfectly too.
Re: 34 position Hirose kick connector
Posted: July 4th, 2018, 7:58 pm
by PrincessPrinPrin
rodwod wrote:phillv85 wrote:They're definitely Hirose, I've made dozens of them.
Sure but the jst one should fit perfectly too.
No because the pitch of the Hirose is 2.5mm while that of the JSt is 2.0 mm.
Re: 34 position Hirose kick connector
Posted: July 4th, 2018, 8:20 pm
by erzane
Correct, it's a Hirose
Yeah I mistaked the link before
Thanks guys
Re: 34 position Hirose kick connector
Posted: July 4th, 2018, 10:42 pm
by rodwod