34 position Hirose kick connector

[erzane]

Since I'm loolking for this connector, I found this:
https://www.digikey.ch/product-detail/f ... -ND/558529
Is it the correct one (positions aren't correct but it should be the same serie, I guess..)?

Thanks

[nem]

Correct for what? What are you going to use it for?

[erzane]

Correct for what? What are you going to use it for?

Kick harness CPS2

[nem]

Ahh, but your link points to a 20 pin connector.

The one you want is:

https://wiki.arcadeotaku.com/w/HRS_DF1B
https://www.digikey.com/products/en?key ... 34DS-2.5RC

[leonardoliveira]

Since I'm loolking for this connector, I found this:
https://www.digikey.ch/product-detail/f ... -ND/558529
Is it the correct one (positions aren't correct but it should be the same serie, I guess..)?

Thanks

That looks exactly like my CPS2/CPS3 kick harness... So I suppose the positions are actually right, too.

[rodwod]

Jst not hirose.
https://uk.rs-online.com/web/p/pcb-conn ... s/9182722/

[leonardoliveira]

My kick harness connector is actually Hirose. Has "HRS" marked on a corner.

[phillv85]

They're definitely Hirose, I've made dozens of them.

[rodwod]

They're definitely Hirose, I've made dozens of them.

Sure but the jst one should fit perfectly too.

[PrincessPrinPrin]

They're definitely Hirose, I've made dozens of them.

Sure but the jst one should fit perfectly too.

No because the pitch of the Hirose is 2.5mm while that of the JSt is 2.0 mm.

[erzane]

Correct, it's a Hirose
Yeah I mistaked the link before
Thanks guys

[rodwod]

Crimps for the jst plug.
https://uk.rs-online.com/web/p/products/6881381/