Sega Lindbergh PSU
-
- Posts: 674
- Joined: February 18th, 2015, 12:03 am
- Location: Metro City
- eBay: jaime5171
Sega Lindbergh PSU
I just bought a Sega Lindbergh. I was hoping to place power it straight from the outlet, just as a Type X, but when I took it out from the Blast City it was placed in, the blast had a very weird PSU, with wide connectors, not the usual BC PSU, and the Lindbergh doesnt have the usual 3 pin power socket. Has anybody gone around this? Powering a Lindbergh without the specific Sega PSU?
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Sega Lindbergh PSU
use an a good quality 700w atx pc power supply and use the the 24 pin connector only on the lindy
-
- Posts: 674
- Joined: February 18th, 2015, 12:03 am
- Location: Metro City
- eBay: jaime5171
Re: Sega Lindbergh PSU
grantspain wrote:use an a good quality 700w atx pc power supply and use the the 24 pin connector only on the lindy
Thanks Grant! I have noticed that the Lindbergh is powered by two connectors:
Do ATX PSUs have the same two connectors with same voltage layout? In the Wiki they only speak about the 24pin one.
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Sega Lindbergh PSU
you only need the top connector to power the Lindbergh- standard 24 pin atx
-
- Posts: 674
- Joined: February 18th, 2015, 12:03 am
- Location: Metro City
- eBay: jaime5171
Re: Sega Lindbergh PSU
Ok, thanks! No idea what the other is for, but it was plugged in...
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Sega Lindbergh PSU
yeah the Lindbergh psu uses two plugs but an atx only needs the one- that is how they are
-
- Posts: 674
- Joined: February 18th, 2015, 12:03 am
- Location: Metro City
- eBay: jaime5171