IGS PGM geometry Problem

tomiii · Post by **tomiii** » January 17th, 2018, 8:13 am

Hi,

i have an geometry Problem with the igs pgm system mobo.
Tested all 3 cave games on 2 different cabs(net city and astro).
I have an batteryholder + new battery on it.

Anybody an idea?

26856140_1876430455731344_1506134171_n.jpg

26913656_1876430515731338_1792056013_n.jpg

26943622_1876430595731330_201608635_n.jpg

Chucky1980 · Post by **Chucky1980** » January 17th, 2018, 8:26 am

The picture is shift and sqeezed ~5cm to the left side too

Post by **DaveyD** » January 17th, 2018, 9:36 am

What monitors have you tried it with? are they the original monitors from the NC, and AC?

The reason i ask is because the PGM mobo has a slightly odd sync. On my WG D9400 monitor i have to switch the sync mode when playing a PGM game else the geometry gets skewed at the top similar but worse than what is showing in your photo, but when i play on a machine with a Nanao MS9-29 it just works fine

Chucky1980 · Post by **Chucky1980** » January 17th, 2018, 4:41 pm

Yes on the original Monitors... The Problem is on 3 different Monitors... NC, Astro and with supergun on a B&O MX7000

Flinnster · Post by **Flinnster** » January 17th, 2018, 6:43 pm

So is the output the same with the wobbly edge and offset on the vertical position on every single monitor in exactly the same way? Seems real odd that this would be the PGM at fault, and not just a monitor chassis pot setting.

IGS PGM geometry Problem

IGS PGM geometry Problem

Re: IGS PGM geometry Problem

Re: IGS PGM geometry Problem

Re: IGS PGM geometry Problem

Re: IGS PGM geometry Problem