Cleaning up an attempted cap-change on a Fever SOS pcb.
Wondering if someone with the pcb could help me out, it would be much appreciated.
First, what is the value on the film-cap at place "C44"?
Then I would need Cap-values (mF and volt) on all caps to see if they are correct?
x12 (marked in the pic.)
Fever SOS, cap help needed. Fixed!
- monouchi
- Polishing his shaft
- Posts: 1124
- Joined: February 21st, 2010, 6:16 pm
- Location: Sweden
- eBay: monouchi_jn
- Initials: BUS
Fever SOS, cap help needed. Fixed!
Last edited by monouchi on July 16th, 2015, 6:01 pm, edited 2 times in total.
- Monstermug
- Posts: 192
- Joined: March 13th, 2011, 11:18 pm
- Location: London, UK
- eBay: Monstermug
- Initials: SON
Re: Fever SOS, cap help needed.
C44 = 153k
C52 = 470uf 16v
C57 = 47uf 16v
C56 = 47uf 16v
C40 = 22uf 16v
C30 = 100uf 25v
C27 = 100uf 25v
C45 = 22uf 16v
C39 = 10uf 35v
C29 = 1000uf 16v
C34 = 1000uf 16v
C32 = 1000uf 16v
C2 = 47uf 16v
hth.
C52 = 470uf 16v
C57 = 47uf 16v
C56 = 47uf 16v
C40 = 22uf 16v
C30 = 100uf 25v
C27 = 100uf 25v
C45 = 22uf 16v
C39 = 10uf 35v
C29 = 1000uf 16v
C34 = 1000uf 16v
C32 = 1000uf 16v
C2 = 47uf 16v
hth.
- monouchi
- Polishing his shaft
- Posts: 1124
- Joined: February 21st, 2010, 6:16 pm
- Location: Sweden
- eBay: monouchi_jn
- Initials: BUS
Re: Fever SOS, cap help needed.
Just awesome!Monstermug wrote:C44 = 153k
C52 = 470uf 16v
C57 = 47uf 16v
C56 = 47uf 16v
C40 = 22uf 16v
C30 = 100uf 25v
C27 = 100uf 25v
C45 = 22uf 16v
C39 = 10uf 35v
C29 = 1000uf 16v
C34 = 1000uf 16v
C32 = 1000uf 16v
C2 = 47uf 16v
hth.
Youre my hero Monstermug. <3
Many thanks.
- monouchi
- Polishing his shaft
- Posts: 1124
- Joined: February 21st, 2010, 6:16 pm
- Location: Sweden
- eBay: monouchi_jn
- Initials: BUS
Re: Fever SOS, cap help needed.
Still need to confirm values on a Fever SOS board.
(Monstermugs was a Dangun Feveron board.)
(Monstermugs was a Dangun Feveron board.)