Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

PCB problems and fixes
Forum rules
ArcadeOtaku forum introduction & rules
User avatar
emphatic
Breastfeeds when required
Posts: 6966
Joined: April 7th, 2009, 4:14 pm
Location: Alingsås, Sweden
eBay: jorgen_sjolander
Initials: JOR

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby emphatic » January 18th, 2016, 9:24 am

Thank you! Sounds cool.
User avatar
SuperPang
Posts: 9796
Joined: August 16th, 2008, 2:45 pm
Location: UK
Contact:

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby SuperPang » January 18th, 2016, 1:02 pm

You can also buy one of 10 limited edition kits! :lolno:
Braintrash
Posts: 428
Joined: February 17th, 2011, 6:31 pm
Location: Paris, France
eBay: yuu_madrigal

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby Braintrash » January 18th, 2016, 1:11 pm

geotrig wrote:
emphatic wrote:
coolmod wrote:A new Progear CPS2 Hack with a bunch of new things! Will be a great addition to the CPS2 library.(This is not CPS2 Multi ready, but hopefully the creator will make it so)

http://halfwaytohell.gameordie.com/

http://halfwaytohell.gameordie.com/inferno/dante.zip

Check it out!


Their webpage is terrible in my phone, is there a list of changes/additions you could quote?


Q: Is there a complete list of changes in this game vs. the original Progear?
A: No but the obvious major changes are:

→you start out in the second loop of the Japan version with a 500,000 counter, but enemy bullets are slower

→player plane speeds are much faster

→the bomb game is changed

→you respawn in place after a death instead of getting kicked back to the beginning of the stage

→the scoring system is different from the original second loop: gunner mines for diamonds and fighter mines for rings and you you get points for simply killing enemies in addition to the counter game


This is Progay no Arashi, for when you can't play so you tune down the game rather than improving skills. :awe:

Waiting eagerly for Gaygaypachi. :oops:
darksoft
Posts: 123
Joined: July 8th, 2011, 10:04 pm
Location:
eBay: greenberetfan
Initials: PFG

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby darksoft » January 24th, 2016, 3:03 pm

SuperPang wrote:You can also buy one of 10 limited edition kits! :lolno:


I'm interested on buying one, but their site says:

10 kits were made for arcades.
They are not for sale.


As the game is freely available for download I converted it to be used with the multigame.
Arcade Project Master at www.arcade-projects.com
Rocco
Posts: 265
Joined: February 7th, 2016, 10:51 pm
Location: Navarra

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby Rocco » March 31st, 2016, 7:45 pm

I bought in Ebay a complete kit A + B boards with the B board modified with full All in one CPS2 by Darkshoft.

Everything works perfectly but I found missing the Dungeons and dragons shadow over Mystara


Do you know if that rom was missing from scratch?

Tower of doom is in...
User avatar
Sp33dFr34k
Posts: 204
Joined: December 3rd, 2011, 12:27 pm
Location: The Netherlands
eBay: 3d_collector

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby Sp33dFr34k » March 31st, 2016, 9:57 pm

Rocco wrote:I bought in Ebay a complete kit A + B boards with the B board modified with full All in one CPS2 by Darkshoft.

Everything works perfectly but I found missing the Dungeons and dragons shadow over Mystara


Do you know if that rom was missing from scratch?

Tower of doom is in...


Here you go:

http://www.arcade-projects.com/forums/i ... -multikit/
Rocco
Posts: 265
Joined: February 7th, 2016, 10:51 pm
Location: Navarra

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby Rocco » April 1st, 2016, 7:14 am

Sp33dFr34k wrote:
Rocco wrote:I bought in Ebay a complete kit A + B boards with the B board modified with full All in one CPS2 by Darkshoft.

Everything works perfectly but I found missing the Dungeons and dragons shadow over Mystara


Do you know if that rom was missing from scratch?

Tower of doom is in...


Here you go:

http://www.arcade-projects.com/forums/i ... -multikit/



Oh,is really updateable?

Looks like mine is old then.

Will take a look later to see What tools are necessary but being that bad with computers that kind of unknown works for me are scaring, because I don't want to destroy what's running fine now :lol:
User avatar
Sp33dFr34k
Posts: 204
Joined: December 3rd, 2011, 12:27 pm
Location: The Netherlands
eBay: 3d_collector

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby Sp33dFr34k » April 1st, 2016, 9:40 am

You open up the B board (few torx acrews), you take out the micro sd and put it in your PC/laptop. Download the file you want, put it in the correct folder and the rest in reversed order, et voila.
Rocco
Posts: 265
Joined: February 7th, 2016, 10:51 pm
Location: Navarra

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby Rocco » April 8th, 2016, 12:14 pm

Sp33dFr34k wrote:You open up the B board (few torx acrews), you take out the micro sd and put it in your PC/laptop. Download the file you want, put it in the correct folder and the rest in reversed order, et voila.


Thank you very much!

Then is pretty much the same as working with PC and emulators with roms...
illipower
Posts: 2
Joined: October 9th, 2016, 9:37 am
Location: home

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby illipower » October 9th, 2016, 9:41 am

Hello,

i just received my cps2 multikit. i installed it and got it working. Then i tried solder the auto reset wire and now i always get "no sd card" error msg. I desoldered the area but the SD card still isn't registering. I'm i SOL? any chance of saving this?
please help.

Kurt
User avatar
MitsurugiW
Posts: 151
Joined: September 19th, 2012, 10:49 pm
Location: New Bern, NC
eBay: mitsurugi-w
Initials: JBW
Contact:

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby MitsurugiW » October 9th, 2016, 3:15 pm

Where are you located?

Pictures of the area?
illipower
Posts: 2
Joined: October 9th, 2016, 9:37 am
Location: home

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby illipower » October 9th, 2016, 5:11 pm

Hello,

i'm located near Chicago, Illinois

here are the pics of the area:
https://www.dropbox.com/s/ksyhj4mo9ffgm ... 1.jpg?dl=0
https://www.dropbox.com/s/a2c6vikds03b0 ... 2.jpg?dl=0
https://www.dropbox.com/s/wz4sqpea66lk9 ... 3.jpg?dl=0

hope that helps, thanks for taking a look at this

Kurt
User avatar
MitsurugiW
Posts: 151
Joined: September 19th, 2012, 10:49 pm
Location: New Bern, NC
eBay: mitsurugi-w
Initials: JBW
Contact:

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby MitsurugiW » October 9th, 2016, 5:32 pm

Damn. Looks like you were using way too much heat. I can take a look at it for you but there will be a tech fee since it is not a defective kit. PM me for details.
Asure
Posts: 529
Joined: April 17th, 2013, 5:16 pm
Location: Netherlands
eBay: asure_nl

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby Asure » October 9th, 2016, 7:54 pm

Looks like you burnt that good. Don't solder things if you don't know what to do. :(
Hope this can be fixed.
User avatar
bartre
Posts: 13
Joined: April 15th, 2015, 4:54 am
Location:

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby bartre » March 6th, 2017, 6:54 am

okay, so a bit of a problem with my kit
the games run fine, but the LCD doesn't.
I can still flash new games, but i can't tell what they're supposed to be.
my lcd looks like this:

http://i.imgur.com/XbxwS21.jpg
User avatar
MitsurugiW
Posts: 151
Joined: September 19th, 2012, 10:49 pm
Location: New Bern, NC
eBay: mitsurugi-w
Initials: JBW
Contact:

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby MitsurugiW » March 6th, 2017, 10:00 am

You can probably fix that by rewriting your sd card. Copy the files to your computer, reformat, copy them all back over to the sd card. Test and let us know.
User avatar
bartre
Posts: 13
Joined: April 15th, 2015, 4:54 am
Location:

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby bartre » March 9th, 2017, 6:37 am

MitsurugiW wrote:You can probably fix that by rewriting your sd card. Copy the files to your computer, reformat, copy them all back over to the sd card. Test and let us know.

yup - worked like a charm.
quick question though, my multi isn't auto resetting after a game rewrite, I've got the jumper coming from the little point on the PCB (attached by you) and run to the little connector on the end of the board.
any clues?
User avatar
MitsurugiW
Posts: 151
Joined: September 19th, 2012, 10:49 pm
Location: New Bern, NC
eBay: mitsurugi-w
Initials: JBW
Contact:

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby MitsurugiW » March 10th, 2017, 2:56 am

Can I see a picture where you have it plugged in?
User avatar
trev1976
Posts: 751
Joined: March 30th, 2009, 7:17 pm
Location: Southampton

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby trev1976 » March 13th, 2017, 7:53 pm

Out of curiosity, are these kits still available to buy ?
Check out my "1cc" YouTube Channel
YouTube
spmbx
Posts: 913
Joined: December 26th, 2008, 11:18 am
Location: .NL

Re: Darksoft's CPS2 Multikit Tech Support Thread (No Killing B-Boards!)

Postby spmbx » March 13th, 2017, 8:09 pm


Return to “Game Hardware Q&A”



Who is online

Users browsing this forum: No registered users