Hi,
I have read that you can power your raspberry pi using the CN12 header on the Naomi 2...but I was wondering in which way would I mod the USB cable? I have cut off the normal connector off the USB cable, and I'm left with four wires, red, black, green and white. I have got some connectors off a donor cable that fits the CN12 header but I have no idea which cable goes where. I can't find any info off the net, so if anyone has any information, preferably with a easy to follow diagram would be great.
Thanks.
Sega Naomi CN12
-
- Posts: 77
- Joined: December 18th, 2013, 10:32 am
- Location: Birmingham, UK
- eBay: luckiestdcalive
- Initials: COR
- baddy
- Please Continue...
- Posts: 387
- Joined: January 28th, 2010, 12:40 am
- Location: Sweden, Stockholm
- eBay: irishfrog89
- Initials: CHI
Re: Sega Naomi CN12
i used pin 1 and 4 in CN12 for +5v and GND, check with a multimeter which is which.
USB cable : red is 5v and black is ground.
USB cable : red is 5v and black is ground.
-
- Please Continue...
- Posts: 2
- Joined: November 12th, 2021, 6:04 am
- Location: Us
- eBay: Hyp36rmax
- Initials: HYP