Hello there, I have a naomi 2 board which has a fault and wondering if anyone knows what that fault could be, the board starts but it moves basically frame by frame also there is a checkerboard effect to the screen which flashes on each frame, hope that makes sense
Thanks all
bit of help on the naomi 2 board
-
- Please Continue...
- Posts: 98
- Joined: November 11th, 2013, 9:17 pm
- Location: Wigan, England
- eBay: recycle-squad
-
- Posts: 162
- Joined: March 6th, 2013, 5:38 pm
- Location: France
Re: bit of help on the naomi 2 board
Can U make a short video ?
Which is the error code displayed ?
Which is the error code displayed ?
-
- Please Continue...
- Posts: 98
- Joined: November 11th, 2013, 9:17 pm
- Location: Wigan, England
- eBay: recycle-squad
Re: bit of help on the naomi 2 board
there is no error code, it seems by more research its the cpu that is at fault which apparently means i may as well bin it
- denson
- Posts: 517
- Joined: February 22nd, 2012, 10:36 am
- Location: Norwich, Norfolk
- eBay: chubba100
Re: bit of help on the naomi 2 board
Have you tried entering the test menu and running through the memory checks? Sounds like an issue I had once which was (from memory) ic22 bad. It meant that a chip needed to be replaced (soldered though ) but it was a common fault apparently...