Hi to all
I have an original pcb of turtles in time that give me some glitch error on the sprites
I've done the mask rom test
that test give me no error at the end but during the test when mask rom 15 start I see this
In another forum i read about changing rom 7K and 7L
I've replaced 7K, desoldered the original one, put a socket and then burnt a 27c400, but i've the same error
first of doing it also to 7L, anybody can tell me something more?
thank you to all
Aldo
Turtles in time graphic error
- Capoz
- Please Continue...
- Posts: 12
- Joined: August 24th, 2012, 1:31 pm
- Location: ITALY
- eBay: Capozhwm
-
- Posts: 573
- Joined: April 17th, 2013, 5:16 pm
- Location: Netherlands
- eBay: asure_nl
Re: Turtles in time graphic error
Mask rom content is copied into ram during the test, this is normal. Test results should come on the screen after that.. what do the tests say?
- Capoz
- Please Continue...
- Posts: 12
- Joined: August 24th, 2012, 1:31 pm
- Location: ITALY
- eBay: Capozhwm
Re: Turtles in time graphic error
Asure wrote:Mask rom content is copied into ram during the test, this is normal. Test results should come on the screen after that.. what do the tests say?
Say that's it all ok
But I have alway horizobtal line on the characters
Tomorrow I'll make a video or see the issue.
- Capoz
- Please Continue...
- Posts: 12
- Joined: August 24th, 2012, 1:31 pm
- Location: ITALY
- eBay: Capozhwm
Re: Turtles in time graphic error
Video of the problem
-
- Posts: 573
- Joined: April 17th, 2013, 5:16 pm
- Location: Netherlands
- eBay: asure_nl
Re: Turtles in time graphic error
Well, looks like a broken video ram or buffer (74LS245) but can be something else as well. Dry solder joint, or hairline fracture on a trace.. etc.
No RAM errors are reported ever?
Do you have any tools? Multimeter, logic probe, scope.. things like that?
No RAM errors are reported ever?
Do you have any tools? Multimeter, logic probe, scope.. things like that?
- Capoz
- Please Continue...
- Posts: 12
- Joined: August 24th, 2012, 1:31 pm
- Location: ITALY
- eBay: Capozhwm
Re: Turtles in time graphic error
I have a multimeterAsure wrote:Well, looks like a broken video ram or buffer (74LS245) but can be something else as well. Dry solder joint, or hairline fracture on a trace.. etc.
No RAM errors are reported ever?
Do you have any tools? Multimeter, logic probe, scope.. things like that?
RAM errors where can be detected?
thank you for the help