Forgotten Worlds Connector

PCB problems and fixes
Post Reply
User avatar
jepjepjep
Posts: 149
Joined: July 16th, 2009, 10:13 pm
Location: California

Forgotten Worlds Connector

Post by jepjepjep » January 30th, 2013, 3:24 am

I'm looking for the connector that's used for the spinner harness that attaches to the PCB on Forgotten Worlds. I have a FW board and an arkanoid spinner I want to try to connect to it. I know that it is different from a CPS1 or CPS2 kick harness connector, but I don't actually know what kind of connector is used. Any ideas?

boergi
Please Continue...
Posts: 138
Joined: August 17th, 2008, 8:31 pm
Location: Zofingen, Switzerland
eBay: boergi_x

Re: Forgotten Worlds Connector

Post by boergi » January 30th, 2013, 4:40 pm


User avatar
jepjepjep
Posts: 149
Joined: July 16th, 2009, 10:13 pm
Location: California

Re: Forgotten Worlds Connector

Post by jepjepjep » January 30th, 2013, 7:00 pm

I took a look at the manual and it's the 16-pin connector that I need (page 22). I didn't see any part numbers or description about what type of connector it is though (other than CN-MOWS).

User avatar
FrancoB
J+ member of the year finalist!
Posts: 4576
Joined: June 8th, 2009, 10:42 pm
Location: Buckinghamshire
eBay: francosquashking
Initials: FRN

Re: Forgotten Worlds Connector

Post by FrancoB » January 30th, 2013, 7:03 pm

Have you got a photo of either the header or the connector?

User avatar
jepjepjep
Posts: 149
Joined: July 16th, 2009, 10:13 pm
Location: California

Re: Forgotten Worlds Connector

Post by jepjepjep » January 30th, 2013, 9:19 pm

Here's a photo of the board with the male side of the connector (CN-MOWS):

Image

User avatar
FrancoB
J+ member of the year finalist!
Posts: 4576
Joined: June 8th, 2009, 10:42 pm
Location: Buckinghamshire
eBay: francosquashking
Initials: FRN

Re: Forgotten Worlds Connector

Post by FrancoB » January 30th, 2013, 9:30 pm

It looks to be a 16 pin JST NH header - part number B16P-SHF-1AA

The mating connector would be H16P-SHF-AA and the crimp pins for it are SHF-001T-0.8BS

User avatar
jepjepjep
Posts: 149
Joined: July 16th, 2009, 10:13 pm
Location: California

Re: Forgotten Worlds Connector

Post by jepjepjep » January 30th, 2013, 10:48 pm

Thanks for the info!

Post Reply