Mechanical coin mechs for Japanese cabinet

PCB problems and fixes
Post Reply
User avatar
Ringtail
Please Continue...
Posts: 106
Joined: August 17th, 2008, 8:18 pm
Location:

Mechanical coin mechs for Japanese cabinet

Post by Ringtail »

Hey guys, i have a Guitar Freaks / Drum Mania V6 combo coming in from Japan atm and i need to find the correct type of coin mechs to fit it. I was looking at the S10 50p mechs from pinball heaven ( http://www.pinballheaven.co.uk/shop/pro ... e827f7b05c" ) but i'm not 100% sure if their side loading. Any advice or help on the matter would be appreciated. Will probably need 2x 50p mechs and 2x1euro mechs.

Picture of the type of cabs for reference below (replaced with actual cabs this time)

Image

Image
Last edited by Ringtail on April 13th, 2011, 6:29 pm, edited 1 time in total.
People have the right to be stupid, but some abuse that privilege.
purplec
Posts: 598
Joined: August 17th, 2008, 6:51 pm
Location: Dublin, Ireland

Re: Mechanical coin mechs for Japanese cabinet

Post by purplec »

They came, you werent kidding about how big they would be.

They look really well
User avatar
AeroCityMayor
Previously alien_mame
Posts: 2005
Joined: July 25th, 2009, 1:05 pm
Location: West Yorks, UK
eBay: air_fortless
Initials: ACM

Re: Mechanical coin mechs for Japanese cabinet

Post by AeroCityMayor »

The ten bob pinball heaven mech will be a straight swap for an AD-81P and a ¥100 mech can easily be modded to take 1euro coins.

If you need any more help, just holler.

HTH

Cheers,

Ralph.
Image
User avatar
Ringtail
Please Continue...
Posts: 106
Joined: August 17th, 2008, 8:18 pm
Location:

Re: Mechanical coin mechs for Japanese cabinet

Post by Ringtail »

They're not here yet C but they should be leaving port in the next few days :)

Thanks for the info ralph, would definately be interested in learning how to tweak the yen mechs to euros, got a spare one sitting here already :)
People have the right to be stupid, but some abuse that privilege.
User avatar
AeroCityMayor
Previously alien_mame
Posts: 2005
Joined: July 25th, 2009, 1:05 pm
Location: West Yorks, UK
eBay: air_fortless
Initials: ACM

Re: Mechanical coin mechs for Japanese cabinet

Post by AeroCityMayor »

Hi d00d,

You're very welcome.

http://wiki.arcadeotaku.com/w/AD-81P_Coin_Acceptor"

Any questions, again, just holler.

Cheers,

Ralph.
Image
Post Reply