Battle Garegga PCB Revision Change

PCB problems and fixes
Post Reply
User avatar
goatboy
Posts: 852
Joined: October 5th, 2008, 3:39 pm
Location: The Netherlands
eBay: henknieborg

Battle Garegga PCB Revision Change

Post by goatboy » April 7th, 2011, 9:36 pm

Hello,

I want to change my Taiwan Region Battle Garegga PCB into a Japanese one. Do i just need to burn and insert the two program roms found on this page? That's all?

http://www.world-of-arcades.net/R8zing/ ... isions.htm"

Thanks, Henk.

User avatar
jepjepjep
Posts: 149
Joined: July 16th, 2009, 10:13 pm
Location: California

Re: Battle Garegga PCB Revision Change

Post by jepjepjep » April 8th, 2011, 12:10 am

Yes, it's a two eeprom swap. I would suggest using the zakk version.

http://bigcore.rsdio.com/zakk/replay/?p=98"

User avatar
goatboy
Posts: 852
Joined: October 5th, 2008, 3:39 pm
Location: The Netherlands
eBay: henknieborg

Re: Battle Garegga PCB Revision Change

Post by goatboy » April 8th, 2011, 7:39 am

Thanks but those roms do not check anymore. Also heard you have to clip jumper 3 and 4. So going back to the original Taiwan version is impossible after that? :think:

About the zakk hack. These are ips patches. How do you patch the original JP roms? :eh:

User avatar
nem
Posts: 1449
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Battle Garegga PCB Revision Change

Post by nem » April 8th, 2011, 10:07 am

The classic IPS.EXE. Used to apply hacks/patches to ROMs. Usage is "IPS x.rom y.ips" where x is the name of the target rom, and y is the patch file in the same directory. Now includes the Turbo Pascal source code!
http://www.zophar.net/utilities/patchutil.html"

User avatar
yosai
280bpm's too slow
Posts: 3681
Joined: August 17th, 2008, 5:00 pm
Location: London
eBay: yosai

Re: Battle Garegga PCB Revision Change

Post by yosai » April 8th, 2011, 10:30 am

Download the MAME ROMs and an IPS patcher. Good to go.

The Jumpers can be easily soldered back if required.

Edit, didn't see the reply above. :lol:

User avatar
goatboy
Posts: 852
Joined: October 5th, 2008, 3:39 pm
Location: The Netherlands
eBay: henknieborg

Re: Battle Garegga PCB Revision Change

Post by goatboy » April 8th, 2011, 12:16 pm

Thanks a lot ppl! :thumbup:

Post Reply