What chip type is a naomi buffer chip?
Posted: April 1st, 2011, 3:27 am
I was wondering what type of buffer chip is used on a naomi cart? any tips on where to find them would be grand
Thx
Max
Thx
Max
自宅で日本のアーケードゲーム
https://forum.arcadeotaku.com/
According to Andy Error 1 has nought to do with the buffer chips mate. What exactly is wrong with the cart?maxio098ui wrote:Ok finally found my glasses and some good light, It is a zero gunner 2 cart. there are 9 chips on the two connector side of the cart. Im assuming that those are the buffer chips? There are two types of chips within those nine. If i get a error 01, I would have to replace all 9?
5x LCX16245G
4X LCX16373G
I may of mixed up the error but i know the cart has been run above 5.2V.wonderbanana wrote:According to Andy Error 1 has nought to do with the buffer chips mate. What exactly is wrong with the cart?maxio098ui wrote:Ok finally found my glasses and some good light, It is a zero gunner 2 cart. there are 9 chips on the two connector side of the cart. Im assuming that those are the buffer chips? There are two types of chips within those nine. If i get a error 01, I would have to replace all 9?
5x LCX16245G
4X LCX16373G
I get so confused with the advice on thischannelmaniac wrote:Yes, Error 01 can be caused by those pesky buffers...
Replace all of 'em.
and another error 1. Flipping Naomi's...if the buffers had gone the game would not function at all - error 02.