Hi guys.
I have a problem with thoose Naomi Game.
Naomi 2 virtua striker 3 got error 01. I've cleaned connectors and pcb but no lucky.
Naomi 1 Royal Rumble The game is recognised from naomi board but i got black screen. I've tried to make a board rom test but naomi test menu didn't start and after that reboots to Main screen. Same story, cleaned everything.
Any help??
Naomi 1 Game Royal Rumble / Virtua striker 3 Issues
- gnomx
- Posts: 196
- Joined: October 8th, 2013, 9:12 pm
- Location: 26
- eBay: Cuccion
- Initials: DED
- Contact:
- JoeAwesome
- Posts: 39
- Joined: February 4th, 2019, 5:02 pm
- Location: TX
- eBay: joeawesome
- Initials: JOE
Re: Naomi 1 Game Royal Rumble / Virtua striker 3 Issues
All the voltages look good under load?
- gnomx
- Posts: 196
- Joined: October 8th, 2013, 9:12 pm
- Location: 26
- eBay: Cuccion
- Initials: DED
- Contact:
Re: Naomi 1 Game Royal Rumble / Virtua striker 3 Issues
Bro. Tell me where I have musure voltage... Behind connectors?
- JoeAwesome
- Posts: 39
- Joined: February 4th, 2019, 5:02 pm
- Location: TX
- eBay: joeawesome
- Initials: JOE
Re: Naomi 1 Game Royal Rumble / Virtua striker 3 Issues
Back of the motherboard with the PSU plugged in and powered on. From the picture, it's CN1.
You do not have the required permissions to view the files attached to this post.
- nem
- Needs a custom rank
- Posts: 2768
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Naomi 1 Game Royal Rumble / Virtua striker 3 Issues
I don't know why but I had to run Royal Rumble at 5.15V to work, otherwise it boots to a black screen. Every other cart works fine at 5.00V.
Try giving it some more juice.
Try giving it some more juice.