Hi,
i have an geometry Problem with the igs pgm system mobo.
Tested all 3 cave games on 2 different cabs(net city and astro).
I have an batteryholder + new battery on it.
Anybody an idea?
IGS PGM geometry Problem
- tomiii
- Please Continue...
- Posts: 53
- Joined: January 18th, 2017, 7:35 am
- Location: Austria
IGS PGM geometry Problem
You do not have the required permissions to view the files attached to this post.
-
- Please Continue...
- Posts: 3
- Joined: October 19th, 2015, 6:37 pm
- Location: Germany
Re: IGS PGM geometry Problem
The picture is shift and sqeezed ~5cm to the left side too
- DaveyD
- Posts: 344
- Joined: December 9th, 2014, 7:14 am
- Location: Grimsby, UK
- eBay: Dr_Daph
- Initials: DPD
Re: IGS PGM geometry Problem
What monitors have you tried it with? are they the original monitors from the NC, and AC?
The reason i ask is because the PGM mobo has a slightly odd sync. On my WG D9400 monitor i have to switch the sync mode when playing a PGM game else the geometry gets skewed at the top similar but worse than what is showing in your photo, but when i play on a machine with a Nanao MS9-29 it just works fine
The reason i ask is because the PGM mobo has a slightly odd sync. On my WG D9400 monitor i have to switch the sync mode when playing a PGM game else the geometry gets skewed at the top similar but worse than what is showing in your photo, but when i play on a machine with a Nanao MS9-29 it just works fine
-
- Please Continue...
- Posts: 3
- Joined: October 19th, 2015, 6:37 pm
- Location: Germany
Re: IGS PGM geometry Problem
Yes on the original Monitors... The Problem is on 3 different Monitors... NC, Astro and with supergun on a B&O MX7000
- Flinnster
- Please Continue...
- Posts: 334
- Joined: September 19th, 2016, 12:06 am
- Location: Surrey
- eBay: flinnster
- Initials: KID
Re: IGS PGM geometry Problem
So is the output the same with the wobbly edge and offset on the vertical position on every single monitor in exactly the same way? Seems real odd that this would be the PGM at fault, and not just a monitor chassis pot setting.
WTD: Rolling Thunder pcb, ANY Dino King / Love & Berry / MushiKing spare parts!!