exA-Arcadia
-
- Posts: 2
- Joined: May 14th, 2018, 10:50 am
- Location: Wigan
- eBay: stewalls
- Initials: STE
Re: exA-Arcadia
I use an old HD Fury 1 that I had in the drawer.
Genders are both wrong so needed a short M/M DVI-D cable and a F/F VGA coupler.
Genders are both wrong so needed a short M/M DVI-D cable and a F/F VGA coupler.
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: exA-Arcadia
There's a whole thread for them on the Shmups hardware forum:
https://shmups.system11.org/viewtopic.php?f=6&t=59860
I have the Portta one
https://www.port-ta.com/fr/catalog/prod ... tegory/45/
https://shmups.system11.org/viewtopic.php?f=6&t=59860
I have the Portta one
https://www.port-ta.com/fr/catalog/prod ... tegory/45/
- Shou
- Posts: 758
- Joined: August 25th, 2009, 4:45 am
- Location: Central Tokyo, Japan, Asia, Earth, Solar System, Milky Way
- Initials: SHO
Re: exA-Arcadia
As I eluded to earlier, new exA-Arcadia tech enabled games on the system to reach 1 frame input lag. Depending upon the underlying engine used for a given game, the minimum input lag achievable varies. Certain engines like Game Maker Studio require updating in their tech stacks and we are in contact with them to help improve their products. However, even for Unity and Unreal 3D games, we are able to get to 2 frames of input lag much like many JAMMA games. A forthcoming research post will go over this in more detail but as some people have already started requesting updates, the list is below. As time permits we are updating past titles.
Below are the titles which have been updated:
Aka & Blue Type-R 1.2.0T 2f
Infinos EXA 1.0.8T 1f
Psyvariar Delta AC 1.0.1T 2f
Shikhondo Red Purgatory 1.0.2T 3f
Rival Megagun XE 1.0.4T 2f
Vritra Hexa 1.1.0T 2f
Fight of Gods Arcade Edition 1.0.0T 2f
Gimmick! Exact Mix 1.0.7 1f
Super Battle Princess Madelyn 1.1.0T 3f
Kira Kira Star Night exa 1.0.1 1f
Starting after the New Year, we will accept games for updating.
Contact support through our site for more details.
Have a Happy New Year everyone and see you in the arcade in 2022.
PS: New titles like Samurai Spirits 0 Special Complete, Akai Katana EXA Label and P-47 Aces Akai are already 1 frame input lag making some of them more responsive than the original JAMMA boards.
Below are the titles which have been updated:
Aka & Blue Type-R 1.2.0T 2f
Infinos EXA 1.0.8T 1f
Psyvariar Delta AC 1.0.1T 2f
Shikhondo Red Purgatory 1.0.2T 3f
Rival Megagun XE 1.0.4T 2f
Vritra Hexa 1.1.0T 2f
Fight of Gods Arcade Edition 1.0.0T 2f
Gimmick! Exact Mix 1.0.7 1f
Super Battle Princess Madelyn 1.1.0T 3f
Kira Kira Star Night exa 1.0.1 1f
Starting after the New Year, we will accept games for updating.
Contact support through our site for more details.
Have a Happy New Year everyone and see you in the arcade in 2022.
PS: New titles like Samurai Spirits 0 Special Complete, Akai Katana EXA Label and P-47 Aces Akai are already 1 frame input lag making some of them more responsive than the original JAMMA boards.
Last edited by Shou on December 31st, 2021, 3:27 pm, edited 1 time in total.
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: exA-Arcadia
One frame is nuts. Well done.
- Buddyc
- Posts: 114
- Joined: October 5th, 2019, 1:04 am
- Location: Norway
- eBay: haver-san
- Initials: BAD
Re: exA-Arcadia
Impressive... Most Impressive!
- Nomax
- Posts: 191
- Joined: February 10th, 2010, 5:09 pm
- Location: Belgium
- eBay: nomax_be
- Initials: NMX
- Contact:
Re: exA-Arcadia
Without wanting to sound like a fanboy, I sincerely believe that no other arcade manufacturer takes input delay seriously as exA-Arcadia (let's not even mention the consumer game publishers).
- Unknownsou
- Posts: 94
- Joined: June 19th, 2009, 1:53 am
- Location: USA
- eBay: unknownsou630
- Initials: VAG
Re: exA-Arcadia
The emphasis on low input lag is amusing given that so few people are going to know what that even means... but I'm glad they're taking it so seriously.
- Nomax
- Posts: 191
- Joined: February 10th, 2010, 5:09 pm
- Location: Belgium
- eBay: nomax_be
- Initials: NMX
- Contact:
Re: exA-Arcadia
That's right, but even if you don't know about it, you can feel if there is too much input delay. The experience is less enjoyable.Unknownsou wrote: ↑January 1st, 2022, 6:40 pm The emphasis on low input lag is amusing given that so few people are going to know what that even means... but I'm glad they're taking it so seriously.
These numbers are the ones in an optimal setup. Delay quickly adds up with some I/O boards and monitor models. So it can quickly become noticeable. You minimize the chance when you have minimal delay at the start of the chain.
- zak
- Acetated
- Posts: 1633
- Joined: October 19th, 2014, 1:35 pm
- Location: UK
- eBay: NA
Re: exA-Arcadia
Tried buddyc's recommendation. No sync on my ms2933.nem wrote: ↑December 30th, 2021, 12:17 pm Probably
Pang's recommendation www.amazon.co.uk/dp/B07D3XZ9SD/
BuddyC's www.amazon.com/dp/B00SW9JI9A/
Anyone else had this issue?
- Buddyc
- Posts: 114
- Joined: October 5th, 2019, 1:04 am
- Location: Norway
- eBay: haver-san
- Initials: BAD
Re: exA-Arcadia
Weird.. Works great on Toshiba PE0493, PD1843, PD2637 (New Net City) and tried it on a Nanao MS-2932-S( Naomi Universal -Europe) with no issues.zak wrote: ↑January 7th, 2022, 10:17 pmTried buddyc's recommendation. No sync on my ms2933.nem wrote: ↑December 30th, 2021, 12:17 pm Probably
Pang's recommendation www.amazon.co.uk/dp/B07D3XZ9SD/
BuddyC's www.amazon.com/dp/B00SW9JI9A/
Anyone else had this issue?
Are you sure you have set the dip switches to SD? Check that resolution actually is 31 Khz on your Vewlix.
- zak
- Acetated
- Posts: 1633
- Joined: October 19th, 2014, 1:35 pm
- Location: UK
- eBay: NA
Re: exA-Arcadia
My mistake. I used pang's benfei one. It didn't work.
You're using hdmi to vga? I thought exa only uses dvi?
You're using hdmi to vga? I thought exa only uses dvi?
- Buddyc
- Posts: 114
- Joined: October 5th, 2019, 1:04 am
- Location: Norway
- eBay: haver-san
- Initials: BAD
Re: exA-Arcadia
Yup. HDMI to VGA works great on all my cabs.
Exa works flawlessly with HDMI. Just hook it up to your TV and give it a go. Vritra Hexa on a 65” OLED is a killer good time!
- Aurich
- Posts: 49
- Joined: January 25th, 2016, 8:54 pm
- Location: SoCal
Re: exA-Arcadia
I dunno, in my experience with both the fighting game and shmup communities input lag is an extremely common topic, and just about everyone knows what it means. Putting an emphasis on it is smart I think, it's been the opposite with plenty of arcade titles. Nesica Live 2 has a **** reputation for input lag with people for instance. There are tier lists in Japan for games at home vs arcade where the arcade has more input lag and it changes strategy enough that different characters come out on top.
- Neo Gold
- Posts: 453
- Joined: October 28th, 2008, 10:25 pm
- Location: In my Garage..
- eBay: neo$gold
- Initials: N$G
Re: exA-Arcadia
Who bought Vritra Hexa?...& is it worth picking up ?..looks slick & smooth.
WANTED! .. Any Tatty old candy cab!.
- Halloween Jack
- Please Continue...
- Posts: 40
- Joined: October 25th, 2008, 10:37 am
- Location: Derby
Re: exA-Arcadia
I have the LE edition of Vritra Hexa with motherboard for sale if of interest.
Regards,
HJ
Regards,
HJ
Now Playing:
- Dodonpachi True Death Exa Label
- AKA&Blue
- Dai Ou Jou Black Label
- Dodonpachi True Death Exa Label
- AKA&Blue
- Dai Ou Jou Black Label
- Halloween Jack
- Please Continue...
- Posts: 40
- Joined: October 25th, 2008, 10:37 am
- Location: Derby
Re: exA-Arcadia
Halloween Jack wrote: ↑January 8th, 2022, 1:24 am I have the LE edition of Vritra Hexa with motherboard for sale if of interest.
Regards,
HJ
You do not have the required permissions to view the files attached to this post.
Now Playing:
- Dodonpachi True Death Exa Label
- AKA&Blue
- Dai Ou Jou Black Label
- Dodonpachi True Death Exa Label
- AKA&Blue
- Dai Ou Jou Black Label
- Halloween Jack
- Please Continue...
- Posts: 40
- Joined: October 25th, 2008, 10:37 am
- Location: Derby
Re: exA-Arcadia
Halloween Jack wrote: ↑January 8th, 2022, 1:38 amHalloween Jack wrote: ↑January 8th, 2022, 1:24 am I have the LE edition of Vritra Hexa with motherboard for sale if anyone fancies some dragon slaying.
UK only though. Brand new and only used a few times. £500 off retail if of interest. Ping me a PM.
Harness not included.
Regards,
HJ
Now Playing:
- Dodonpachi True Death Exa Label
- AKA&Blue
- Dai Ou Jou Black Label
- Dodonpachi True Death Exa Label
- AKA&Blue
- Dai Ou Jou Black Label
- Buddyc
- Posts: 114
- Joined: October 5th, 2019, 1:04 am
- Location: Norway
- eBay: haver-san
- Initials: BAD
- Nomax
- Posts: 191
- Joined: February 10th, 2010, 5:09 pm
- Location: Belgium
- eBay: nomax_be
- Initials: NMX
- Contact:
Re: exA-Arcadia
This is one of my next purchases.
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: exA-Arcadia
I think the score rush mode is a bit pants, but yeah, it's a good game.
It's less than 12 euros on Steam if you want to try it out
It's less than 12 euros on Steam if you want to try it out