Hi guys I've been struggling with this one for a while.
The darksoft multi Cps2 comes with a tiny ribbon connector that attaches to the LCD display for choosing which game you want to play.
Does anyone know the part number for the ribbon as I'd like to get a longer one.
Any information would be great.
Thanks.
Darksoft Cps2 parts
- shenglongbadboy
- Posts: 38
- Joined: February 14th, 2013, 9:10 am
- Location: Derby
- nem
- Needs a custom rank
- Posts: 2769
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Darksoft Cps2 parts
The official support forums for Darksoft's products is here:
http://www.arcade-projects.com/forums/
The cable looks like a pretty standard 10 pin cable (2.54 mm pitch?). You should be able to find one on eBay. Just punch "10 pin cable" in the search and look for a similar one.
http://www.arcade-projects.com/forums/
The cable looks like a pretty standard 10 pin cable (2.54 mm pitch?). You should be able to find one on eBay. Just punch "10 pin cable" in the search and look for a similar one.
- shenglongbadboy
- Posts: 38
- Joined: February 14th, 2013, 9:10 am
- Location: Derby
Re: Darksoft Cps2 parts
Thanks very much.
I'll get on it.
I'll get on it.
- wigsplitta
- Savile's alibi
- Posts: 1178
- Joined: December 11th, 2008, 11:38 am
- Location: Fareham / Crawley
Re: Darksoft Cps2 parts
How long is your current cable?
I've got a spare 30cm cable, although I can't remember if that was the default length or shorter/longer.
I've got a spare 30cm cable, although I can't remember if that was the default length or shorter/longer.
I Got PAID...
ウィッグスプリッター - スーパーガレージゲームセンター。
ウィッグスプリッター - スーパーガレージゲームセンター。
- idc
- Ralf Little impersonator
- Posts: 1311
- Joined: October 16th, 2008, 9:17 pm
- Location: Tamworth, Staffordshire
- eBay: iancourt
- Initials: IAN
- Contact: