Who uses 24khz?

Post by **grantspain** » February 22nd, 2009, 11:15 pm

I have always wanted to know this

xlr8d · Post by **xlr8d** » February 22nd, 2009, 11:21 pm

i got a fistfull of modelboards vf3, swta, pilotkids, etc thats the only reaseon i have to use 24k mode

February 22nd, 2009, 11:37 pm

All I own are 15khz games.

Post by **Pete** » February 23rd, 2009, 5:24 am

HOTD1 uses it

Post by **mastercello** » February 23rd, 2009, 7:36 am

15k and 31k only

Post by **andygeezer** » February 23rd, 2009, 9:28 am

I got about 20+ games that use 25K, but then I am Sega royality.. Seriously some of the best arcade games are Med Res..

Post by **markedkiller78** » February 23rd, 2009, 9:40 am

Never had the need to. I'd probably dedicate a cab to 24k if I had a any need as I'm not keen on manualy changing jumpers everytime I want to play a game

Post by **sven666** » February 23rd, 2009, 9:41 am

i only have gradius 4 which is 24khz.. but my trisynch monitor is permanently vertical so it doesnt get much play

Post by **cools** » February 23rd, 2009, 9:42 am

markedkiller78 wrote:Never had the need to. I'd probably dedicate a cab to 24k if I had a any need as I'm not keen on manualy changing jumpers everytime I want to play a game

Don't you have an autoswitching monitor or ten?

Post by **markedkiller78** » February 23rd, 2009, 9:45 am

cools wrote:
markedkiller78 wrote:Never had the need to. I'd probably dedicate a cab to 24k if I had a any need as I'm not keen on manualy changing jumpers everytime I want to play a game
Don't you have an autoswitching monitor or ten?

Just the one mate. I've gone all low tech

Post by **dj_johnnyg** » February 23rd, 2009, 6:25 pm

VS2, VF2 (when I get a new Videoboard) and VF3.

Tri sync monitor & have JAMMA looms made up for them, so no biggy

GaijinPunch · Post by **GaijinPunch** » February 23rd, 2009, 8:33 pm

Crack Down

And now that I have an AVGA2, I'll be playing some Gain Ground, finally!

capcomguru · Post by **capcomguru** » February 23rd, 2009, 9:16 pm

I voted "never", even though I've used it twice LOL.

Once I used it on my Astro 2 (back when I had the MS8) to see if my VIrtua Fighter 1 boardset worked, and if the 24khz circuit on my chassis worked. They both worked fine, never powered the board up again...

The second time I used it was with Bass Fishing in my blast city cabinet. I dind't have the jamma harness yet, and needed to test if my weiya chassis upgrade was successful.

So aside from two times, nope I never use it :p

mission · Post by **mission** » February 24th, 2009, 12:19 am

I only got virtua fighter 2 , it`s no big deal to change the jumper over on the astro.

Post by **AeroCityMayor** » February 24th, 2009, 1:52 am

mission wrote:I only got virtua fighter 2 , it`s no big deal to change the jumper over on the astro.

O/T

Nice avatar d00d!

doutor · Post by **doutor** » February 24th, 2009, 3:21 pm

.........

Alukid · Post by **Alukid** » February 25th, 2009, 11:53 pm

I use the 24Khz on Gradius IV, Its the only pcb i have that requires me to get in behind the egret2 and change jumper, It's worth it though, the game looks awesome in midres.

Who uses 24khz?

who uses 24khz on their cab(non dedicated cabs only)

Who uses 24khz?

Re: Who uses 24khz?

Re: Who uses 24khz?

Re: Who uses 24khz?

Re: Who uses 24khz?

Re: Who uses 24khz?

Re: Who uses 24khz?

Re: Who uses 24khz?

Re: Who uses 24khz?

Re: Who uses 24khz?

Re: Who uses 24khz?

Re: Who uses 24khz?

Re: Who uses 24khz?

Re: Who uses 24khz?

Re: Who uses 24khz?

Re: Who uses 24khz?

Re: Who uses 24khz?