Versus setups using two boardmasters or the new Combo AV EX++
-
- Please Continue...
- Posts: 90
- Joined: September 1st, 2008, 5:24 am
- Location: Houston, TX USA
Versus setups using two boardmasters or the new Combo AV EX++
I was wondering if anyone attempted doing a versus setup using two boardmasters or the new Combo AV EX++. I was thinking about buying two of the combo av's since they support full Japanese panels. I had a few ideas, but I don't want to damage neither superguns to do it. I wanted to get two 1 player panels and a sanwa versus cable with the CPS-2 connector but I'm trying to figure out what to do about connecting the player 2 kick buttons to the harness without having to drill into either superguns. Any suggestions on how I can get this done as cleanly as possible?
- copados33
- Please Continue...
- Posts: 538
- Joined: March 20th, 2013, 1:30 pm
- Location: Uruguay South America
- eBay: psycho-q
Re: Versus setups using two boardmasters or the new Combo AV EX++
All that you'll need its on the edge connector/fingerboard, just build/modify a harness for routing the player 2 controls to the "edge" conector of the 2nd supergun, very easy if you have each supergun proprietary pinout.
-
- Please Continue...
- Posts: 90
- Joined: September 1st, 2008, 5:24 am
- Location: Houston, TX USA
Re: Versus setups using two boardmasters or the new Combo AV EX++
Yeah I noticed Tops sells the fingerboards. Maybe I’ll order some.