Good controllers for Supergun modding

Everything Supergun related
Forum rules
ArcadeOtaku forum introduction & rules
Post Reply
CaptCatfish
Posts: 2
Joined: September 15th, 2016, 3:43 am
Location: United States
eBay: megack1000
Initials: CKC

Good controllers for Supergun modding

Post by CaptCatfish » August 24th, 2017, 3:57 am

Are there any off-brand/knockoff controllers worth sacrificing for supergun compatibility? I previously attempted to make a simple controller out of a 6-button Genesis-style controller I had but the main controller chip was epoxy-capped so I had no idea where the VCC was running off from. Any cheap/knockoff controller that is uncapped helps.

Eddierang
Posts: 61
Joined: September 1st, 2008, 5:24 am
Location: Houston, TX USA

Re: Good controllers for Supergun modding

Post by Eddierang » May 3rd, 2018, 6:14 am

Instead of modding a controller, why don't you use the Brook PS3/PS4 to Neo-Geo Converter. They sell them on www.arcadeshock.com.

TheLastBandit
Posts: 32
Joined: August 15th, 2013, 10:29 pm
Location:

Re: Good controllers for Supergun modding

Post by TheLastBandit » May 9th, 2018, 9:33 am

If you are familiar with compiling for ATMEGA microcontollers you could built your own converter.

The source for my superguns is on github, converts Playstation/Saturn/SNES/NES/Megadrive/PC-Engine to Jamma compatible (+ autofire).

https://github.com/theLastBandit/superguns

Post Reply