Page 1 of 1

The Special Version of Combo AV Supergun overview

Posted: April 25th, 2012, 7:37 pm
by Paulie
Well I got one of these bad boys yesterday so thought I'll do another overview type thing like I did for my Vega & AV6000 as there ain't a lot of info out there. I thought I would start it now but I'll add to this post over the next few days when after I've spent a bit of time with it. I need to swap the stick top to ball tops but other than than it in excellent shape.

First up there is a short and a long version of this SG I have the long version ;)
Now I'm not 100% sure but I believe the there was a 2L6B version and the only decent photo i have of the short version (below) may be a modded 2L6B, note the buttons are only marked 1, 2, 3 (No 4,5,6) also placement of 2P 4,5,6 doesn't look right.

heres a couple of pics for comparison

Short version
Image

Long Version
Image

Re: The Special Version of Combo AV Supergun overview

Posted: May 2nd, 2012, 7:19 pm
by Paulie
Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Re: The Special Version of Combo AV Supergun overview

Posted: May 3rd, 2012, 12:19 pm
by AeroCityMayor
Well smart and well put together: also in very good nick!

Another super gun where the controls have been soldered to the loom - I don't understand that - my Pana is just the same.

Cheers,

Ralph.

Re: The Special Version of Combo AV Supergun overview

Posted: May 4th, 2012, 9:31 pm
by Paulie
alienmame wrote:Another super gun where the controls have been soldered to the loom - I don't understand that - my Pana is just the same.

Cheers,

Ralph.
No, it's seems odd. I would have presumed it would be eaiser and obviously more practicle to use regular crimp connectors. BTW the buttons are Shinden (you can't really see the company stamp in my crap pic :palm: ) rather than Seimitsu or Sanwa.

Re: The Special Version of Combo AV Supergun overview

Posted: May 7th, 2012, 3:49 pm
by guldberget
Nice photos and overview as usual Paulie. Just out of curiosity, what are all the dip switches on the connector pcb for?

Re: The Special Version of Combo AV Supergun overview

Posted: January 29th, 2013, 7:29 pm
by Paulie
TBH I have no idea what the dip switches do :oops: I should have a mess with them really and find out.

Henk wanted a few pics of the loom so thought I would post them here as they may be of use to someone else too :)

BTW the extra little loom was made by the lovely FrannyB for the original owner for playing AW games

Parts side
Image

Parts side
Image

Parts side
Image

Solder side
Image

Solder side
Image

PDF Manual with pinout here
http://wiki.arcadeotaku.com/images/8/87/Combo_av.pdf"

I'll add pics of the CPS2 loom later as I'm not sure where it is a the moment

Re: The Special Version of Combo AV Supergun overview

Posted: October 19th, 2016, 5:07 am
by Layer
Hi,

I recently got a Super Combo AV (in fact it looks like the longer version with a different Jamma/connector board) and I noticed that yellow RCA video connector is disabled : thin cuts done intentionally on the Jamma/connector board... so, I'd like to know if it is disabled too in the longer version of the gun.

I will post some pics if needed.

Re: The Special Version of Combo AV Supergun overview

Posted: October 22nd, 2016, 10:53 pm
by Paulie
Hmm, that's really interesting, wonder why they decided to do that. Yeah do you have a photo mate.

Re: The Special Version of Combo AV Supergun overview

Posted: October 23rd, 2016, 4:45 pm
by Layer
Paulie wrote:Hmm, that's really interesting, wonder why they decided to do that. Yeah do you have a photo mate.
Here are the pics.

The original 110V PSU inside is a Nidec PKA-7010SZ.

Click on each tiny pic to enlarge :

Super Combo AV Supergun :
Image

Super Combo AV Jamma/connector board :
Image

AC cord, main fuse and power button :
Image

+ 5 V adjustment button :
Image

RGB out :
Image

Opening the supergun (player 1 side) :
Image

Opening the supergun (player 2 side) :
Image

Opening the supergun (Jamma/connector board) :
Image

Jamma/connector board removed :
Image

The thin cuts on Jamma/connector board I talked about in my preview post :
Image

And at last, behind Jamma/connector board (you can notice the dipswitch at the bottom) :
Image

Re: The Special Version of Combo AV Supergun overview

Posted: November 3rd, 2016, 8:57 am
by Layer
Update : I got a RGB cable from Retrogamingcables, it's just fine.
Gonna take my multimeter to check yellow and S-video outs and the encoder CXA1145P.

Re: The Special Version of Combo AV Supergun overview

Posted: March 7th, 2019, 4:21 pm
by Ecks89
I jusf got one of these with theninternal speakers not working. I replaced the speakers and still no sound all the wiring is good maybe the caps? Any info would greatly be appreciated thanks

Re: The Special Version of Combo AV Supergun overview

Posted: March 9th, 2019, 7:45 pm
by penrhos
Ecks89 wrote:
March 7th, 2019, 4:21 MP
I jusf got one of these with theninternal speakers not working. I replaced the speakers and still no sound all the wiring is good maybe the caps? Any info would greatly be appreciated thanks
I think one of the switches on the end panel turns them off (for when you're using headphones or the RGB port).