The Special Version of Combo AV Supergun overview
- Paulie
- Opens wallet, moths fly out
- Posts: 2599
- Joined: September 28th, 2011, 5:43 pm
- Location: East Ardsley, West Yorks
- eBay: retro-paulie
- Initials: PSG
The Special Version of Combo AV Supergun overview
Well I got one of these bad boys yesterday so thought I'll do another overview type thing like I did for my Vega & AV6000 as there ain't a lot of info out there. I thought I would start it now but I'll add to this post over the next few days when after I've spent a bit of time with it. I need to swap the stick top to ball tops but other than than it in excellent shape.
First up there is a short and a long version of this SG I have the long version
Now I'm not 100% sure but I believe the there was a 2L6B version and the only decent photo i have of the short version (below) may be a modded 2L6B, note the buttons are only marked 1, 2, 3 (No 4,5,6) also placement of 2P 4,5,6 doesn't look right.
heres a couple of pics for comparison
Short version
Long Version
First up there is a short and a long version of this SG I have the long version
Now I'm not 100% sure but I believe the there was a 2L6B version and the only decent photo i have of the short version (below) may be a modded 2L6B, note the buttons are only marked 1, 2, 3 (No 4,5,6) also placement of 2P 4,5,6 doesn't look right.
heres a couple of pics for comparison
Short version
Long Version
Last edited by Paulie on May 2nd, 2012, 7:31 pm, edited 1 time in total.
- Paulie
- Opens wallet, moths fly out
- Posts: 2599
- Joined: September 28th, 2011, 5:43 pm
- Location: East Ardsley, West Yorks
- eBay: retro-paulie
- Initials: PSG
- AeroCityMayor
- Previously alien_mame
- Posts: 2005
- Joined: July 25th, 2009, 1:05 pm
- Location: West Yorks, UK
- eBay: air_fortless
- Initials: ACM
Re: The Special Version of Combo AV Supergun overview
Well smart and well put together: also in very good nick!
Another super gun where the controls have been soldered to the loom - I don't understand that - my Pana is just the same.
Cheers,
Ralph.
Another super gun where the controls have been soldered to the loom - I don't understand that - my Pana is just the same.
Cheers,
Ralph.
- Paulie
- Opens wallet, moths fly out
- Posts: 2599
- Joined: September 28th, 2011, 5:43 pm
- Location: East Ardsley, West Yorks
- eBay: retro-paulie
- Initials: PSG
Re: The Special Version of Combo AV Supergun overview
No, it's seems odd. I would have presumed it would be eaiser and obviously more practicle to use regular crimp connectors. BTW the buttons are Shinden (you can't really see the company stamp in my crap pic ) rather than Seimitsu or Sanwa.alienmame wrote:Another super gun where the controls have been soldered to the loom - I don't understand that - my Pana is just the same.
Cheers,
Ralph.
-
- Please Continue...
- Posts: 18
- Joined: October 16th, 2011, 9:52 pm
- Location: Stockholm, Sweden
- Initials: MAG
Re: The Special Version of Combo AV Supergun overview
Nice photos and overview as usual Paulie. Just out of curiosity, what are all the dip switches on the connector pcb for?
WTB PCBs: Deathsmiles, Demon Front
WTB console games: Battle Garegga (Sat), In The Hunt (Sat)
WTB console games: Battle Garegga (Sat), In The Hunt (Sat)
- Paulie
- Opens wallet, moths fly out
- Posts: 2599
- Joined: September 28th, 2011, 5:43 pm
- Location: East Ardsley, West Yorks
- eBay: retro-paulie
- Initials: PSG
Re: The Special Version of Combo AV Supergun overview
TBH I have no idea what the dip switches do I should have a mess with them really and find out.
Henk wanted a few pics of the loom so thought I would post them here as they may be of use to someone else too
BTW the extra little loom was made by the lovely FrannyB for the original owner for playing AW games
Parts side
Parts side
Parts side
Solder side
Solder side
PDF Manual with pinout here
http://wiki.arcadeotaku.com/images/8/87/Combo_av.pdf"
I'll add pics of the CPS2 loom later as I'm not sure where it is a the moment
Henk wanted a few pics of the loom so thought I would post them here as they may be of use to someone else too
BTW the extra little loom was made by the lovely FrannyB for the original owner for playing AW games
Parts side
Parts side
Parts side
Solder side
Solder side
PDF Manual with pinout here
http://wiki.arcadeotaku.com/images/8/87/Combo_av.pdf"
I'll add pics of the CPS2 loom later as I'm not sure where it is a the moment
-
- Posts: 162
- Joined: March 6th, 2013, 5:38 pm
- Location: France
Re: The Special Version of Combo AV Supergun overview
Hi,
I recently got a Super Combo AV (in fact it looks like the longer version with a different Jamma/connector board) and I noticed that yellow RCA video connector is disabled : thin cuts done intentionally on the Jamma/connector board... so, I'd like to know if it is disabled too in the longer version of the gun.
I will post some pics if needed.
I recently got a Super Combo AV (in fact it looks like the longer version with a different Jamma/connector board) and I noticed that yellow RCA video connector is disabled : thin cuts done intentionally on the Jamma/connector board... so, I'd like to know if it is disabled too in the longer version of the gun.
I will post some pics if needed.
- Paulie
- Opens wallet, moths fly out
- Posts: 2599
- Joined: September 28th, 2011, 5:43 pm
- Location: East Ardsley, West Yorks
- eBay: retro-paulie
- Initials: PSG
Re: The Special Version of Combo AV Supergun overview
Hmm, that's really interesting, wonder why they decided to do that. Yeah do you have a photo mate.
-
- Posts: 162
- Joined: March 6th, 2013, 5:38 pm
- Location: France
Re: The Special Version of Combo AV Supergun overview
Here are the pics.Paulie wrote:Hmm, that's really interesting, wonder why they decided to do that. Yeah do you have a photo mate.
The original 110V PSU inside is a Nidec PKA-7010SZ.
Click on each tiny pic to enlarge :
Super Combo AV Supergun :
Super Combo AV Jamma/connector board :
AC cord, main fuse and power button :
+ 5 V adjustment button :
RGB out :
Opening the supergun (player 1 side) :
Opening the supergun (player 2 side) :
Opening the supergun (Jamma/connector board) :
Jamma/connector board removed :
The thin cuts on Jamma/connector board I talked about in my preview post :
And at last, behind Jamma/connector board (you can notice the dipswitch at the bottom) :
-
- Posts: 162
- Joined: March 6th, 2013, 5:38 pm
- Location: France
Re: The Special Version of Combo AV Supergun overview
Update : I got a RGB cable from Retrogamingcables, it's just fine.
Gonna take my multimeter to check yellow and S-video outs and the encoder CXA1145P.
Gonna take my multimeter to check yellow and S-video outs and the encoder CXA1145P.
-
- Please Continue...
- Posts: 1
- Joined: March 7th, 2019, 4:14 pm
- Location: Santa ana
- eBay: 2011ecks6989
Re: The Special Version of Combo AV Supergun overview
I jusf got one of these with theninternal speakers not working. I replaced the speakers and still no sound all the wiring is good maybe the caps? Any info would greatly be appreciated thanks
- penrhos
- Panel Beater
- Posts: 1477
- Joined: September 11th, 2008, 12:08 pm
- Location: Leicester - UK
- eBay: ngpd002
Re: The Special Version of Combo AV Supergun overview
I think one of the switches on the end panel turns them off (for when you're using headphones or the RGB port).
2 * Vewlix Diamond Blacks,2 * Vewlix-F, 1 * Sega Rally 3, 1 * Video Pinball, 1 * DinoKing (JAMMA Converted).