Search found 3 matches

by chaincarousel
January 4th, 2019, 5:13 pm
Forum: Game Hardware Q&A
Topic: In the Hunt pcb no sprites
Replies: 22
Views: 2855

Re: In the Hunt pcb no sprites

Oh! Look for obvious faults on the PCB then. The first four pins (two on each side) are for ground, the next four for 5V, next two after that for -5V and last two before the notch for 12V. Look for the first components that they go to. There's a short somewhere in there, that's why the PSU is click...
by chaincarousel
January 3rd, 2019, 5:59 pm
Forum: Game Hardware Q&A
Topic: In the Hunt pcb no sprites
Replies: 22
Views: 2855

Re: In the Hunt pcb no sprites

nem wrote:
January 3rd, 2019, 3:00 pm
You most likely shorted the power lines. Open up the PSU and look for visible damage.
The PSU works with other pcb boards without problems. Only in the hunt won't start now so it must be dev. the PCB ?! :(
by chaincarousel
January 1st, 2019, 9:51 am
Forum: Game Hardware Q&A
Topic: In the Hunt pcb no sprites
Replies: 22
Views: 2855

Re: In the Hunt pcb no sprites

I was searching for the same problem on google and found this old thread here. I read that refitting the jumper on the board might help. after resetting the jumper I was a bit careless it seems by replugging the MAK Super gun. For some reason I left the power on before I reputt it on the jamma conne...