I'm not sure what exactly do you need? You've already figured it out. You just need to connect +5V and GND from the connector you have marked to CN10 (provided you have that IO, do you?) RE pinout you have, here's a pic for confirmation: re_dc_out.jpg If you have a regular Type 3 IO (837-14572), th...

So an update, got it all powered up and running on the bench but hit another problem, totally forgot the JVS 3 board needs it's own power feed. I have found it in the Virtua Tennis manual, the lead that goes from the Ringedge power output to CN10 & 11 I believe. Can someone send me a pic so I can tr...

Thanks for confirming, just ordered the 3 pin connectors. Guessing easiest would be cutting up an old kettle lead?

Will have to scour the house for something "non-essential".

You have the connector You can hook that up to a 3 pin plug, ignoring earth Just checked, none of the connectors on that small harness are the right size, they are all too wide. So going by the diagram on the PSU Pink is Live and Blue neutral. Might have a go at knocking up my own cable from an old...

Hmmm, so thinking I had some further cables required, turns out I don't. Anyone have any idea how to knock up the required cable that could be plugged straight into a UK socket? I've seen a couple cables on ebay for US/JP sockets, but obviously without the ground prong. These are the cables and PSU ...

Also, just thought I intend to use this in my Naomi upright cabinet when my garage is cleared out. Will I need to replace the PSU in the cab? Any information will be much appreciated.

Hello all, got a Ringedge 1 & 2 imported from Japan on the Yaj auctions. Put them in storage and only just getting them out to play with, now I didn't realise they had an onboard psu. So the question is, how do I power them up on a bench to do testing etc? With the Lindbergh I got it up and running ...

thechop wrote: ↑

November 10th, 2020, 7:33 pm

Arcadeprojects mate, make yourself an account over there, sure it’ll answer all your questions.

Cheers for that, already a member will drop the question there!

Hi, very long time since I've been on the forums, just managed to win a Buyee auction for a Ringedge board with a few spares. So on to my query, just wondered what the exact differences are between the 2, I'm aware the CPIU, GPU etc are different but what else? Tried to find some information and the...

oh interesting stuff ...will have to have a proper sit down and read later :shifty: so does this run with a Naomi /chihiro and does away with the cards ? Yeah, at the moment you knock up a female serial cable from CN8 from the board (not forgetting to put the Naomi 2 into serial mode via the dip sw...

Hi Guys, not seen information on here about this so thought I would share the news. The Initial D3 card reader has been emulated successfully using some python code, it's currently running on a windows machine and a few cables need knocking up but the creator has put the code out available for anyon...

Hello, To those that might have read I recently had a Naomi 2 board die on me, so I purchased another unit from a member here and 1st thing I did due to recommendation was to remove the "supercap" which does look like it was about to "go". Well plugged my Naomi 2 in to my cabinet with netboot setup ...

A close up of the top of the LED array: Close up of the bottom of the LED array:

Hello, After finally being able to pick up a gun bezel for the Naomi UR I have tried to get it all up and running over the weekend. On the initial setup and powering up the system it would not power up and a funny buzzing/humming sound was coming from the sub-woofer & no LED's lit up, so disconnecte...

A little more screen for the actual game would be nice but I guess that's the problem with the shape of the cabinet itself! The window the game is running in is larger than the stock monitor in the Naomi (or any monitor in any regular sized cab for that matter). Opened it up on my phone initially s...

That doesn't look half bad! I'm guessing it's running mame with a front end? With the move guides along the bottom it looks pretty smart... A little more screen for the actual game would be nice but I guess that's the problem with the shape of the cabinet itself!

I have to say something like that has also already crossed my mind... The big screen and the screen on top is overkill. But with a 32" vertical screen and a fitting bezel I could imagine this wouldn't look too bad. And I would place the "instruction strip" on the bottom of th screen. I thought the ...

The only place you should be showing pictures of this finished monstrosity should be in the Gallery of ****! :problem: You won't be annoying anyone you will just look foolish :( Sounds like someone lacks a sense of humour! And maybe foolish in your opinion... Thankfully it's just that... Opinion! W...

DaveyD wrote:Just use a roll of gaffer tape and a few cable ties to mount it to the front of the naomi. 5 mins job done them back to playing!

I must know where you get these industrial strength cable ties of which you speak of!

Asure wrote:Please don't post any pictures of this arranged unholy marriage. Thanks.

I might have to now... Just to annoy you