I am assuming dual focus. I have included a picture to verify. In the link provided, does that seem to be a dual focus chassis?grantspain wrote:if your tube is dual or single focus?
Thanks.
I am assuming dual focus. I have included a picture to verify. In the link provided, does that seem to be a dual focus chassis?grantspain wrote:if your tube is dual or single focus?
I have contacted Alva Amusement. They seem to be out of stock, so I may very well have to order from arcade-game-sales. I am awaiting a call from Alva tomorrow to find out for sure if they are truly out of stock. If so, I will request that arcade-games possibly swap the neck card and flyback. WOrst case, I can do the swap myself, but I am really wanting to use fresh partsgrantspain wrote:yes so the chassis you sent the link of is not compatible,unless you swap neck card and flyback over
http://www.happmart.com/Pro_Details.asp ... =2&sid=122
if you tell them the crt socket type and the yoke details they should be able to provide one
I Contacted Happmart in regards to the chassis. I believe they are on holiday, so it may be a bit before I get a response. I'll post my results.grantspain wrote:yes so the chassis you sent the link of is not compatible,unless you swap neck card and flyback over
http://www.happmart.com/Pro_Details.asp ... =2&sid=122
if you tell them the crt socket type and the yoke details they should be able to provide one
Pics coming soon!Asure wrote:Phew, i thought you miswired the yoke h/v and fried that. Wires on the remote board don't kill a tube/yoke so that's a bonus right there.
To recap, what are the current symptoms of the monitor/chassis? Does it turn on, do you get a grid?
What combo chassis/tube do you have at this point? Is this a new chassis you were buying, or the original one? Pics will help!
Hey Grant! I have been so busy with life and another cab I am getting going.grantspain wrote:so the 2nd chassis you got was brand new?