How do you store your bare pcb?
-
- Posts: 291
- Joined: November 19th, 2008, 9:56 am
- Location: Italy
Re: How do you store your bare pcb?
I'm now starting to pack mine boards too.....
Not easy because the boards are different for length/height etc...so you need to find good boxes (not too large and not too small)...
Those are the boxes....different measurements available....
And now we are here.....
Much to do but better than before....
Not easy because the boards are different for length/height etc...so you need to find good boxes (not too large and not too small)...
Those are the boxes....different measurements available....
And now we are here.....
Much to do but better than before....
- copados33
- Please Continue...
- Posts: 538
- Joined: March 20th, 2013, 1:30 pm
- Location: Uruguay South America
- eBay: psycho-q
Re: How do you store your bare pcb?
@glstar You have some calcio games I have been looking since for ever, Super Football Champ, Kick'n Run aka Mexico 86, VS Net Soccer
-
- Posts: 291
- Joined: November 19th, 2008, 9:56 am
- Location: Italy
Re: How do you store your bare pcb?
super football champ is double if you want itcopados33 wrote:@glstar You have some calcio games I have been looking since for ever, Super Football Champ, Kick'n Run aka Mexico 86, VS Net Soccer
- copados33
- Please Continue...
- Posts: 538
- Joined: March 20th, 2013, 1:30 pm
- Location: Uruguay South America
- eBay: psycho-q
Re: How do you store your bare pcb?
thanks, but shipping alone would cost more than the board itself
- Shou
- Posts: 758
- Joined: August 25th, 2009, 4:45 am
- Location: Central Tokyo, Japan, Asia, Earth, Solar System, Milky Way
- Initials: SHO
Re: How do you store your bare pcb?
system11 wrote:Shops wrap them up that way when you buy them. I can never work out how to re-wrap them the way they were, it's very carefully done with flaps cut and so on
Many people have asked me to do a tutorial vid on how they cut and wrap them so will do it in the near future.
- Shou
- Posts: 758
- Joined: August 25th, 2009, 4:45 am
- Location: Central Tokyo, Japan, Asia, Earth, Solar System, Milky Way
- Initials: SHO
Re: How do you store your bare pcb?
Yup, alphabetical order for normal PCBs. Oversized ones are by manufacturer since they are generally similar in size. ROM carts are also by format but most aren't in that office.geotrig wrote:i hope they are in alphabetical order ,outside of that very neat and organised looking
- sven666
- Posts: 508
- Joined: August 28th, 2008, 8:03 am
- Location: Hisingen SE
- eBay: sven-666
- Initials: JNX
- Contact:
Re: How do you store your bare pcb?
it doesnt matter how you store them.. space always runs out anyways!?
- geotrig
- Potato!
- Posts: 7533
- Joined: December 5th, 2008, 1:14 pm
- Location: ._.
- eBay: ._.
Re: How do you store your bare pcb?
Shou wrote:Yup, alphabetical order for normal PCBs. Oversized ones are by manufacturer since they are generally similar in size. ROM carts are also by format but most aren't in that office.geotrig wrote:i hope they are in alphabetical order ,outside of that very neat and organised looking
<trk>:I remember catching a big fat one and my friend said "throw it back in, that one already tastes like wood"
- FcoBenitez
- Please Continue...
- Posts: 364
- Joined: August 18th, 2008, 3:31 am
- Location: Chile
- eBay: virtuacl
- Initials: KBL
Re: How do you store your bare pcb?
Excellent thanks ShouShou wrote:system11 wrote:Shops wrap them up that way when you buy them. I can never work out how to re-wrap them the way they were, it's very carefully done with flaps cut and so on
Many people have asked me to do a tutorial vid on how they cut and wrap them so will do it in the near future.
2X Sega Aero City
- SuperPang
- Master or universe
- Posts: 11023
- Joined: August 16th, 2008, 2:45 pm
- Location: UK
- eBay: *_*
- Initials: JOE
- Contact:
Re: How do you store your bare pcb?
Any thoughts on CV1000 kits folks? I store PCBs vertically where possible but my Cave kits are horizontal due to space restrictions. I'm hoping they're OK due to their weight.
- RMRM
- Posts: 514
- Joined: April 20th, 2013, 4:45 pm
- Location: Portugal
Re: How do you store your bare pcb?
I assume you're joking, right?SuperPang wrote:Any thoughts on CV1000 kits folks? I store PCBs vertically where possible but my Cave kits are horizontal due to space restrictions. I'm hoping they're OK due to their weight.
Because they are so tiny and light that i don't think they will flex.
- geosnow
- Posts: 152
- Joined: July 10th, 2011, 6:17 pm
- Location: Obfelden, Switzerland
- eBay: g3osnow
Re: How do you store your bare pcb?
six are stored in my cab.
You do not have the required permissions to view the files attached to this post.
- djsheep
- Posts: 54
- Joined: October 11th, 2017, 7:38 pm
- Location: Australia
- eBay: bulletproofcrates
Re: How do you store your bare pcb?
Dragging up this old post to show off my small game collection and the boxes and labels I've just finished making up... appreciate all the ideas shared in this thread, decided to settle on the Corstat boxes which are about $10 AUD each.
- RoZioN
- Posts: 163
- Joined: November 21st, 2011, 12:54 pm
- Location: Sweden
- Initials: ASH
Re: How do you store your bare pcb?
I have gone the same route, but the boxes here are around 20 AUD each =/
60+ of them.
A local hero is helping me with labels
60+ of them.
A local hero is helping me with labels
You do not have the required permissions to view the files attached to this post.
-
- Posts: 224
- Joined: May 15th, 2010, 7:01 pm
- Location: Berkshire, England
- eBay: jimma-d
- Initials: jmd
Re: How do you store your bare pcb?
For games that I don't play offen I use some of the "really useful" brand of box's sold in the UK, along with some antistatic bubble wrap inside.
They are quite robust with tough plastic and stackable so you can fit a lot together in a small space and being transparent you can see what's inside (as I usually forget!)
They are quite robust with tough plastic and stackable so you can fit a lot together in a small space and being transparent you can see what's inside (as I usually forget!)
You do not have the required permissions to view the files attached to this post.
"Please contact the local attendant"
- markedkiller78
- Pony fucker
- Posts: 7585
- Joined: August 17th, 2008, 6:53 pm
- Location: Glasgow
- eBay: markedkiller78
- Initials: MAL
Re: How do you store your bare pcb?
My transition to full corstat has begun
You do not have the required permissions to view the files attached to this post.
- yosai
- Windy City
- Posts: 4061
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
Re: How do you store your bare pcb?
That's looking like a really nice gaming room.
- zak
- Acetated
- Posts: 1633
- Joined: October 19th, 2014, 1:35 pm
- Location: UK
- eBay: NA
Re: How do you store your bare pcb?
Room looks very nice Are those the original tubes in the Egrets?markedkiller78 wrote:My transition to full corstat has begun
- monouchi
- Polishing his shaft
- Posts: 1124
- Joined: February 21st, 2010, 6:16 pm
- Location: Sweden
- eBay: monouchi_jn
- Initials: BUS
Re: How do you store your bare pcb?
I havent seen your room before, very tidy!RoZioN wrote:I have gone the same route, but the boxes here are around 20 AUD each =/
60+ of them.
A local hero is helping me with labels
- RoZioN
- Posts: 163
- Joined: November 21st, 2011, 12:54 pm
- Location: Sweden
- Initials: ASH
Re: How do you store your bare pcb?
Yeah Mono, I now have 2 cabs and the PCBs in the livingroom since the gamingroom was needed for the little one =)
THAT room however is still a giant **** mess, but Im happy with how the livingroom turned out, I play alot more now than I did before.
THAT room however is still a giant **** mess, but Im happy with how the livingroom turned out, I play alot more now than I did before.