MS8 26 troubles
- tetsujin
- Hello, I say
- Posts: 1949
- Joined: September 8th, 2008, 4:33 pm
- Location: Cheshire
- eBay: kukki_86
- Initials: AC.
MS8 26 troubles
Hi all.
Before I start I am a COMPLETE monitor noob. I know how to turn the pots etc but thats it!
I have just got a Aero City and everyone said how more vibrant these little 26 inch monitors are but mine isnt.
It seems really dull and seems like there is more blue that any other colour. I have twisted lots of pots etc and got it so it looks good on a colour test screen but when in game (Mr Driller G) it still looks bland!
Now, is this just due to the age of the monitor or is it poorly set up??
Can you but new chassis for these or something? I cant do any work myself, i dont have a multi meter and if I did i wouldnt know what to do with it!
Cheers
Adam
Before I start I am a COMPLETE monitor noob. I know how to turn the pots etc but thats it!
I have just got a Aero City and everyone said how more vibrant these little 26 inch monitors are but mine isnt.
It seems really dull and seems like there is more blue that any other colour. I have twisted lots of pots etc and got it so it looks good on a colour test screen but when in game (Mr Driller G) it still looks bland!
Now, is this just due to the age of the monitor or is it poorly set up??
Can you but new chassis for these or something? I cant do any work myself, i dont have a multi meter and if I did i wouldnt know what to do with it!
Cheers
Adam
LOL Cats... stupid cats
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: MS8 26 troubles
man don't you people read my posts,change c332 10uf 250v electrolitic capacitor on the neck card and check for bad solder joints on the crt socket
another important thing to check is your +5v from the psu,a low +5 will affect the picture as well
another important thing to check is your +5v from the psu,a low +5 will affect the picture as well
- tetsujin
- Hello, I say
- Posts: 1949
- Joined: September 8th, 2008, 4:33 pm
- Location: Cheshire
- eBay: kukki_86
- Initials: AC.
Re: MS8 26 troubles
ill just put this... : : : I saw in monitor info that you said change the c332 but you refrenced to the MS8 29 not 26 how big of a job is it to change and where can I find the part?grantspain wrote:man don't you people read my posts,change c332 10uf 250v electrolitic capacitor on the neck card and check for bad solder joints on the crt socket
another important thing to check is your +5v from the psu,a low +5 will affect the picture as well
And refer back to this...
Show me the other post and I can go from there. I don't normally pay much attention the the exact workings of a monitor to be honest so have not read every post on evry monitor ever!tetsujin wrote:
Before I start I am a COMPLETE monitor noob. I know how to turn the pots etc but thats it!
LOL Cats... stupid cats
- yosai
- Windy City
- Posts: 4057
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
- tetsujin
- Hello, I say
- Posts: 1949
- Joined: September 8th, 2008, 4:33 pm
- Location: Cheshire
- eBay: kukki_86
- Initials: AC.
Re: MS8 26 troubles
Cheers!
so... what's next then?
Buy a soldering iron and get replacing?
Is it a simple job and where would I find this 'replacement' part?
Could it be trusted for me to do it or is it a pro job? I can use a soldering iron etc I just have NEVER worked with monitors!
Would I have to do that thing where you stick a screwdriver into the monitor to do this?
Cheers
Adam
so... what's next then?
Buy a soldering iron and get replacing?
Is it a simple job and where would I find this 'replacement' part?
Could it be trusted for me to do it or is it a pro job? I can use a soldering iron etc I just have NEVER worked with monitors!
Would I have to do that thing where you stick a screwdriver into the monitor to do this?
Cheers
Adam
LOL Cats... stupid cats
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: MS8 26 troubles
its an easy job,even for a noob-as long as you can use a soldering iron
but first check your +5volts at the jamma connector with a multimeter-you should be in the range of 5.05 and 5.15
the cap 332 is on every nanao ms8 chassis and it is probably the most common problem-normally it results in poor definition and brightness issues,almost like someone had messed around with the colours etc-sometimes it improves after 10 mins or so but other times it does not
if want a walk through i can do it but make sure you have checked the +5 first and then make sure you have the cap/soldering iron to do the job
you would need to get the cap from dalbani/grandata/cpc/farnell etc-also ebay (you need 10uf 250v radial lead)
but first check your +5volts at the jamma connector with a multimeter-you should be in the range of 5.05 and 5.15
the cap 332 is on every nanao ms8 chassis and it is probably the most common problem-normally it results in poor definition and brightness issues,almost like someone had messed around with the colours etc-sometimes it improves after 10 mins or so but other times it does not
if want a walk through i can do it but make sure you have checked the +5 first and then make sure you have the cap/soldering iron to do the job
you would need to get the cap from dalbani/grandata/cpc/farnell etc-also ebay (you need 10uf 250v radial lead)
- tetsujin
- Hello, I say
- Posts: 1949
- Joined: September 8th, 2008, 4:33 pm
- Location: Cheshire
- eBay: kukki_86
- Initials: AC.
Re: MS8 26 troubles
Cheers mate.grantspain wrote:its an easy job,even for a noob-as long as you can use a soldering iron
but first check your +5volts at the jamma connector with a multimeter-you should be in the range of 5.05 and 5.15
the cap 332 is on every nanao ms8 chassis and it is probably the most common problem-normally it results in poor definition and brightness issues,almost like someone had messed around with the colours etc-sometimes it improves after 10 mins or so but other times it does not
if want a walk through i can do it but make sure you have checked the +5 first and then make sure you have the cap/soldering iron to do the job
you would need to get the cap from dalbani/grandata/cpc/farnell etc-also ebay (you need 10uf 250v radial lead)
I will get a soldering iron and a multi meter first, check whats what and get back to you.
Is this what I need? ....
http://cgi.ebay.co.uk/10uF-250V-CAPACIT ... 500wt_1182
LOL Cats... stupid cats
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
- tetsujin
- Hello, I say
- Posts: 1949
- Joined: September 8th, 2008, 4:33 pm
- Location: Cheshire
- eBay: kukki_86
- Initials: AC.
Re: MS8 26 troubles
when looking for a soldering iron and multi meter is there any requirements/spec I should be looking to buy??
I need to make sure I have the right tool for the job!
I need to make sure I have the right tool for the job!
LOL Cats... stupid cats
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: MS8 26 troubles
just a very basic multimeter and a soldering iron with a fine tip-oh and solder of course
- tetsujin
- Hello, I say
- Posts: 1949
- Joined: September 8th, 2008, 4:33 pm
- Location: Cheshire
- eBay: kukki_86
- Initials: AC.
Re: MS8 26 troubles
cheers, just ordered
As soon as I get the multi meter I can tell whats the Jamma loom is up to!
As soon as I get the multi meter I can tell whats the Jamma loom is up to!
LOL Cats... stupid cats
- cools
- Armed Police Buttrider
- Posts: 13457
- Joined: August 17th, 2008, 4:49 pm
- Location: Wales, United Kingdom
- eBay: hordarian
- Initials: CLS
Re: MS8 26 troubles
Silly little thing, but switching a component out without something to get rid of the old solder clogging up the hole is a pain.
Get yourself a solder sucker too.
Get yourself a solder sucker too.
- Devil Soundwave
- Doesn't go to eleven
- Posts: 4713
- Joined: January 7th, 2009, 11:56 pm
- Location: Wetherby, Yorkshire
- eBay: DevilSoundwave
Re: MS8 26 troubles
Or some desolder braid - both available at Maplin.