SNK Neo 19 WIP
- cools
- Armed Police Buttrider
- Posts: 13459
- Joined: August 17th, 2008, 4:49 pm
- Location: Wales, United Kingdom
- eBay: hordarian
- Initials: CLS
Re: SNK Neo 19 WIP
Recapped the audio on this MV4FT, still get exactly the same static Not sure what to try other than start working my way through 4 slots, which isn't going to be much fun.
Coin mech bolts are on their way from Japan
Coin mech bolts are on their way from Japan
- slugflyer
- Posts: 278
- Joined: February 8th, 2011, 9:28 pm
- Location: London
Re: SNK Neo 19 WIP
That cab is ACHING for a super dodgeball cart.
Here to represent new style VEWLIX arcade fans. Both of you.
- supergoose
- Please Continue...
- Posts: 737
- Joined: September 12th, 2010, 10:38 pm
- Location: Raccoon City, Germany
Re: SNK Neo 19 WIP
could it be that the board was modded for mono sound so that it would meet the jamma standard and could be used in just about any universal jamma cabinet? The 4slot is a stereo board, which has a slightly different pinout and your cab should be wired for stereo, too.cools wrote:You wouldn't notice the PSU noise unless the speakers were unplugged... Interesting you've mentioned that, I've had no trouble with this board in a Pony (that's JAMMA wired to spec and grounded properly).
Wanted: SNK Candy 18 spares. Mainly looking for a marquee holder & the "video games" sign.
- cools
- Armed Police Buttrider
- Posts: 13459
- Joined: August 17th, 2008, 4:49 pm
- Location: Wales, United Kingdom
- eBay: hordarian
- Initials: CLS
Re: SNK Neo 19 WIP
If that was the case I'd not be getting stereo out? Used to run it with an adaptor in other cabs
- supergoose
- Please Continue...
- Posts: 737
- Joined: September 12th, 2010, 10:38 pm
- Location: Raccoon City, Germany
Re: SNK Neo 19 WIP
No, if they modded the board for mono sound, then they cut a trace and bridged another connection. Many arcade ops did this to 2slot boards so that they could run neo games in their cabs without messing with the jamma harness. If your neo 19 is still wired to work with the the 4slot (it does have the light thingy for the 4 mini marquees under the hood, right), then that might be the problem.
I ran into the same problem, when i tested mvs boards with my supergun.
I ran into the same problem, when i tested mvs boards with my supergun.
Wanted: SNK Candy 18 spares. Mainly looking for a marquee holder & the "video games" sign.
- cools
- Armed Police Buttrider
- Posts: 13459
- Joined: August 17th, 2008, 4:49 pm
- Location: Wales, United Kingdom
- eBay: hordarian
- Initials: CLS
Re: SNK Neo 19 WIP
Well my board outputs stereo and the cab plays stereo, through the edge connector
- supergoose
- Please Continue...
- Posts: 737
- Joined: September 12th, 2010, 10:38 pm
- Location: Raccoon City, Germany
Re: SNK Neo 19 WIP
But it worked in the pony without an mvs to jamma adapter?
Wanted: SNK Candy 18 spares. Mainly looking for a marquee holder & the "video games" sign.
- cools
- Armed Police Buttrider
- Posts: 13459
- Joined: August 17th, 2008, 4:49 pm
- Location: Wales, United Kingdom
- eBay: hordarian
- Initials: CLS
Re: SNK Neo 19 WIP
cools wrote:Used to run it with an adaptor in other cabs
- supergoose
- Please Continue...
- Posts: 737
- Joined: September 12th, 2010, 10:38 pm
- Location: Raccoon City, Germany
Re: SNK Neo 19 WIP
Ah, ok. That wasn't really clear in the section that i quoted in my first reply.
Wanted: SNK Candy 18 spares. Mainly looking for a marquee holder & the "video games" sign.
- cools
- Armed Police Buttrider
- Posts: 13459
- Joined: August 17th, 2008, 4:49 pm
- Location: Wales, United Kingdom
- eBay: hordarian
- Initials: CLS
Re: SNK Neo 19 WIP
I've tried a second motherboard - an MV4F (my usual one is an FT). Same problem.
Coin mech arrived from Japan so that's now fitted correctly. Not much left to do except a ton of polishing and some new bolts. Thinking I should get some sort of buffing pads for a drill as working by hand is not happening too quickly...
Coin mech arrived from Japan so that's now fitted correctly. Not much left to do except a ton of polishing and some new bolts. Thinking I should get some sort of buffing pads for a drill as working by hand is not happening too quickly...
- cools
- Armed Police Buttrider
- Posts: 13459
- Joined: August 17th, 2008, 4:49 pm
- Location: Wales, United Kingdom
- eBay: hordarian
- Initials: CLS
Re: SNK Neo 19 WIP
Interesting: http://ikotsu.blogspot.co.uk/2012/01/sn ... k-199.html"
My monitor bezel is black, not grey. It doesn't look like it's been resprayed, but I need to check closely I guess.
My monitor bezel is black, not grey. It doesn't look like it's been resprayed, but I need to check closely I guess.
- cools
- Armed Police Buttrider
- Posts: 13459
- Joined: August 17th, 2008, 4:49 pm
- Location: Wales, United Kingdom
- eBay: hordarian
- Initials: CLS
Re: SNK Neo 19 WIP
Thanks to Pang for confirming the logo sticker size as 230mm. Repros enquired about with Monkey Online.
-
- Posts: 674
- Joined: February 18th, 2015, 12:03 am
- Location: Metro City
- eBay: jaime5171
Re: SNK Neo 19 WIP
Any idea where to find a replacement for the coin slot and the screen cover for this?
Cab looks awesome.
Cab looks awesome.
- zak
- Acetated
- Posts: 1633
- Joined: October 19th, 2014, 1:35 pm
- Location: UK
- eBay: NA
Re: SNK Neo 19 WIP
ALFARBI was going to make the screen covers a year ago, but nothing has happened since. I need a couple of these too.zumbito wrote:Any idea where to find a replacement for the coin slot and the screen cover for this?
Cab looks awesome.
The coin mech pops up on yahoo quite a bit.
-
- Posts: 674
- Joined: February 18th, 2015, 12:03 am
- Location: Metro City
- eBay: jaime5171
Re: SNK Neo 19 WIP
I meant the the coin panel in the door, not the typical asahi coin mech. Does that also come out often in yahoo?zak wrote:ALFARBI was going to make the screen covers a year ago, but nothing has happened since. I need a couple of these too.zumbito wrote:Any idea where to find a replacement for the coin slot and the screen cover for this?
Cab looks awesome.
The coin mech pops up on yahoo quite a bit.