where's v-sync (Nanao MS9-29A-T-SU)?

@Alaska- · Post by **@Alaska-** » May 21st, 2009, 9:42 pm

i can't read the sign under the pot..
i would have to dismantle everything but if you know which is the right pot a can go blind directly from the side of the monitor.
http://www.jomac.net.au/Nanao%20MS9-29A-T-SU.JPG

Post by **grantspain** » May 21st, 2009, 9:46 pm

v sync or v hold you looking for and also whats the problem-not a neo geo by any chance?

@Alaska- · Post by **@Alaska-** » May 21st, 2009, 10:52 pm

so v-hold and v-sync is the same thing?
..
well i found the v hold.. and it doesn't work with my issue.

Actually the monitor it self doesn' have any problem.. it works preatty well.

I was messing with a kind of box(build by a great guy

) that grab the audio and video from jamma.
When a turn on the cab.. the second monitor (a normal tv) shows the game correctly while the cab not.
If i plug out the scart from tv.. the cab works .. if i plug in .. not..
The issue :
http://img190.imageshack.us/img190/5232/43246653.jpg

Post by **grantspain** » May 21st, 2009, 10:55 pm

@Alaska- wrote:so v-hold and v-sync is the same thing?
..
well i found the v hold.. and it doesn't work with my issue.

Actually the monitor it self doesn' have any problem.. it works preatty well.

I was messing with a kind of box(build by a great guy ) that grab the audio and video from jamma.
When a turn on the cab.. the second monitor (a normal tv) shows the game correctly while the cab not.
If i plug out the scart from tv.. the cab works .. if i plug in .. not..
The issue :
http://img190.imageshack.us/img190/5232/43246653.jpg

well yes because you cannot send one video source to two video outputs

@Alaska- · Post by **@Alaska-** » May 21st, 2009, 11:05 pm

why not?
btw the box was tested .. obv not on my cab.. and it works

Post by **grantspain** » May 21st, 2009, 11:07 pm

@Alaska- wrote:why not?
btw the box was tested .. obv not on my cab.. and it works

because you are halving the signal power
you will lose sync

Devil Soundwave · Post by **Devil Soundwave** » May 21st, 2009, 11:09 pm

grantspain wrote: well yes because you cannot send one video source to two video outputs

How do versus cabs work then?

:

@Alaska- · Post by **@Alaska-** » May 21st, 2009, 11:10 pm

i understend...

So how can i get this work? Giving to the box more power..??..

EDIT: same here like devil..
How do they work?

Post by **grantspain** » May 21st, 2009, 11:45 pm

Devil Soundwave wrote:
grantspain wrote: well yes because you cannot send one video source to two video outputs
How do versus cabs work then? :

must use a special splitter pcb

jonny5 · Post by **jonny5** » May 22nd, 2009, 5:23 pm

grantspain wrote:
Devil Soundwave wrote:
grantspain wrote: well yes because you cannot send one video source to two video outputs
How do versus cabs work then? :
must use a special splitter pcb

yup....when i do the rebuild on my other versus city i will make a thread detailing everything with lots of pics.....there is a lot of gear in those suckers......

@Alaska- · Post by **@Alaska-** » May 22nd, 2009, 7:19 pm

grantspain wrote:
Devil Soundwave wrote:
grantspain wrote: well yes because you cannot send one video source to two video outputs
How do versus cabs work then? :
must use a special splitter pcb

well .. i found out that the "magix Box" works pretty well with MVS.
In the try before. i was using a cps2 that give me that issue.

But with mvs the box split perfectly well the imgae between the cab and the tv.

So the problem is the cps2 ...

ill post a pic soon

where's v-sync (Nanao MS9-29A-T-SU)?

where's v-sync (Nanao MS9-29A-T-SU)?

Re: where's v-sync (Nanao MS9-29A-T-SU)?

Re: where's v-sync (Nanao MS9-29A-T-SU)?

Re: where's v-sync (Nanao MS9-29A-T-SU)?

Re: where's v-sync (Nanao MS9-29A-T-SU)?

Re: where's v-sync (Nanao MS9-29A-T-SU)?

Re: where's v-sync (Nanao MS9-29A-T-SU)?

Re: where's v-sync (Nanao MS9-29A-T-SU)?

Re: where's v-sync (Nanao MS9-29A-T-SU)?

Re: where's v-sync (Nanao MS9-29A-T-SU)?

Re: where's v-sync (Nanao MS9-29A-T-SU)?