Arcade Otaku - アーケード オタク

http://www.error24.co.uk"
Yours truly!

http://www.giz10p.co.uk"
Craig is well known within the coin op industry and arcade community-he has a vast knowledge of all monitors

http://www.hantarex.co.uk"
for all hantarex models,Chris is an excellent tech

email harry@pentranic.net
harry clarke is a respected tech in the industry,working for many years with pentranic and able to offer repairs to all pentranic monitors and others

http://www.jomac.net.au"
joey is another well known monitor tech and is based in Australia

http://www.niemandisplays.com"
Rick has been involved with sharp image,eizo/nanao,pentranic and also produces crt.Based in Canada

Eurocoin

Eurocoin are based in a smallish building in Barnet, North London - http://www.eurocoin.co.uk

Devil Soundwave - "The people at Eurocoin are very friendly, and seem like a top bunch of people - even gave me a lift back to the tube station! "
Chubsta - "Eurocoin repaired a monitor for me - great service, much cheaper than I expected - cant recommend them enough! "

If you're in the US/Canada, Chad at http://www.arcadecup.com" does a wide variety of monitors.

RJ

hi

we do most crt repairs from £30 plus parts

You repair CRTs, do you?

chassis for CRT

hantarex, wells gardner, nanao,sanwa, etc etc

would like to add JBmonitorrepair.com to the list. he is located in NJ and has fixed ever monitor chassis i have ever brought to him, including a broken capcom impress chassis that i thought was done for.

http://www.JBmonitorrepair.com"

P&L Video Games
15858 Main St
La Puente, CA 91744
1-800-992-6588

grantspain wrote:http://www.giz10p.co.uk
Craig is well known within the coin op industry and arcade community-he has a vast knowledge of all monitors

http://www.hantarex.co.uk"
for all hantarex models,Chris is an excellent tech

email harry@pentranic.net
harry clarke is a respected tech in the industry,working for many years with pentranic and able to offer repairs to all pentranic monitors and others

http://www.jomac.net.au"
joey is another well known monitor tech and is based in Australia

http://www.niemandisplays.com"
Rick has been involved with sharp image,eizo/nanao,pentranic and also produces crt.Based in Canada

Does anyone know Grantspains contact details - or If your reading this, please drop me a PM!

Many thanks!

Allgood Technical Services, Inc. (FL, USA)
http://www.allgoodusa.com/"

Fast, friendly, reasonably priced, and they specialize in Nanaos. Highly recommended.

This is gunblades site, he just repaired my polo 21 star. I presume thats the same guy. He's away at the moment.

http://www.error24.co.uk

Hey guys do you know any Australians based in Melbourne who could look at my astro city monitor?

I have no idea where he's based but you just have to send it to jomac
http://www.jomac.net.au"
He's the best and a pro at Nanao chassis, which you probably have in your astro.

Alan at PSRA in Wicklow Ireland is recommended for anyone around the East coast. http://www.psra.ie/
He was unable to identify why my Sanwa 29e31s had failed after a new Lopt was replaced by him
HV tested & caps replaced, No fix-No fee so €65 for a Lopt wasn't too bad. either incompatible or a diode is blown somewhere..

Str8upmenace wrote:Hey guys do you know any Australians based in Melbourne who could look at my astro city monitor?

Pinball Mechanics are Located in Melbourne,
We offer drop or in home servicing/pickup.
http://www.pinballmechanics.com/monitor-repair/

Is there anyone in South Wales who repairs monitors?

Hello grantspain,
Ronnie Kolk recommended you for monitor chassis repairs.
I've got a faulty Nanao Ms8-29FSG. Already sent it out for repairs, but it came back with different issues. Seems like the pcb has a small crack. At the moment, when I turn it on, the monitor shows a thin vertical line (when screen is tated) and turns back off after a few seconds.

If you can/want to repair it, shoot me a pm please
I'm located in Germany

Looking for someone who repairs monitor chassis around Essex area. I've been told that grantspain does them? Thanks.

Hi there, on top of my last question, I found a new monitor chassis on ebay that might be suitable for me, all the specs are the same except mine has a Horizontal ohms of 1.2 but the one on ebay has 1.3 ohms. Would it still be suitable? Many thanks.

Jcywong wrote: ↑October 27th, 2018, 8:09 pm Hi there, on top of my last question, I found a new monitor chassis on ebay that might be suitable for me, all the specs are the same except mine has a Horizontal ohms of 1.2 but the one on ebay has 1.3 ohms. Would it still be suitable? Many thanks.

I think this kind of question would be best placed in a separate thread concerning chassis/tube/yoke compatibility, but in any case, the resistance is really not important for the horizontal winding. You should instead get an LCR meter and measure inductance. For example, the MS8-29FSG wants ~0.390mH.