MS9 Tri Sync Question
- GeekMan1222
- Please Continue...
- Posts: 237
- Joined: August 16th, 2014, 3:17 am
- Location: SC, USA
- eBay: geekman2005
MS9 Tri Sync Question
I feel like I have seen this done before like a chassis swap?
Is it possible to turn an MS9 New Astro City monitor into a TriSync monitor. If so are there any real draw backs to that?
Thanks
Is it possible to turn an MS9 New Astro City monitor into a TriSync monitor. If so are there any real draw backs to that?
Thanks
1x New Astro City, 1x Madonna, 1x G-Balance
- RMRM
- Posts: 514
- Joined: April 20th, 2013, 4:45 pm
- Location: Portugal
Re: MS9 Tri Sync Question
You can swap the chassis for a Rodotron 666A, no draw backs. There is also an equivalent Wei ya model.
- GeekMan1222
- Please Continue...
- Posts: 237
- Joined: August 16th, 2014, 3:17 am
- Location: SC, USA
- eBay: geekman2005
Re: MS9 Tri Sync Question
Would that be a wei ya 2931a anyone know?
1x New Astro City, 1x Madonna, 1x G-Balance
- Sp33dFr34k
- Posts: 277
- Joined: December 3rd, 2011, 12:27 pm
- Location: The Netherlands
- eBay: 3d_collector
Re: MS9 Tri Sync Question
Yes, that would be the 3129A indeed.
- monouchi
- Polishing his shaft
- Posts: 1124
- Joined: February 21st, 2010, 6:16 pm
- Location: Sweden
- eBay: monouchi_jn
- Initials: BUS
Re: MS9 Tri Sync Question
Just be prepared for some compression on the right side of the picture at 15kHz.
- Sp33dFr34k
- Posts: 277
- Joined: December 3rd, 2011, 12:27 pm
- Location: The Netherlands
- eBay: 3d_collector
Re: MS9 Tri Sync Question
Among other things, the thing died on me twice now, so don't expect to get any quality time out of it.monouchi wrote:Just be prepared for some compression on the right side of the picture at 15kHz.
- monouchi
- Polishing his shaft
- Posts: 1124
- Joined: February 21st, 2010, 6:16 pm
- Location: Sweden
- eBay: monouchi_jn
- Initials: BUS
Re: MS9 Tri Sync Question
To get those chinese chassis to live longer, replace all caps with good quality ones the moment you get it.Sp33dFr34k wrote:Among other things, the thing died on me twice now, so don't expect to get any quality time out of it.monouchi wrote:Just be prepared for some compression on the right side of the picture at 15kHz.
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: MS9 Tri Sync Question
flybacks are failing on these at a steady rate btw
- Sp33dFr34k
- Posts: 277
- Joined: December 3rd, 2011, 12:27 pm
- Location: The Netherlands
- eBay: 3d_collector
Re: MS9 Tri Sync Question
Upon arrival (brand-new chassis) it had a defective vertical IC, replaced that and worked again. Now a relais just keeps clicking and I have no clue as to why the voltage keeps dropping after T3. Don't think caps would be able to prevent these issues...
- PascalP
- Please Continue...
- Posts: 75
- Joined: August 23rd, 2015, 6:41 am
- Location: Netherlands
- eBay: peule_p
- Initials: PPP
Re: MS9 Tri Sync Question
Are there replacements available? Or is the chassis just an expensive paperweight once the flyback fails?grantspain wrote:flybacks are failing on these at a steady rate btw
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: MS9 Tri Sync Question
I found one seller in china, I tested them and they work perfectly-not cheap though
- GeekMan1222
- Please Continue...
- Posts: 237
- Joined: August 16th, 2014, 3:17 am
- Location: SC, USA
- eBay: geekman2005
Re: MS9 Tri Sync Question
So is it the wei ya that has all these problems or both?
1x New Astro City, 1x Madonna, 1x G-Balance