Hi managed to get my hands on a c3129ds chassis.
However it does not work. The chassis looks brand nee but was sold as is.
The issue is the following:
When powered the relais ( i think RL1) clicks unstoppable with approx 1 click per second.
Also there is no nek glow.
I do hear a very faint high pitch sound as i am used from crts.
Where should i start troubleshooting?
Wei Ya C3129DS chassis not working
-
- Please Continue...
- Posts: 10
- Joined: May 1st, 2016, 6:51 pm
- Location: Netherlands
- eBay: Earcrusher
- Initials: JEF
- Sp33dFr34k
- Posts: 277
- Joined: December 3rd, 2011, 12:27 pm
- Location: The Netherlands
- eBay: 3d_collector
Re: Wei Ya C3129DS chassis not working
Sorry no fix, but I have the same issue with an also brandnew 3129A. Nobody I've contacted is willing to repair it, so I hope somebody here will be able to help out here.
-
- Please Continue...
- Posts: 10
- Joined: May 1st, 2016, 6:51 pm
- Location: Netherlands
- eBay: Earcrusher
- Initials: JEF
Re: Wei Ya C3129DS chassis not working
Hmm that does not sound very promissing then.
Have you tried anything yet?
We could collect this.
If noone is willing to repair i will start messing around with it as it is useless now anyway.
Have you tried anything yet?
We could collect this.
If noone is willing to repair i will start messing around with it as it is useless now anyway.
- Shadolf
- Posts: 287
- Joined: November 6th, 2014, 12:20 pm
- Location: East Switzerlandmann
- eBay: 1984indigo
- Initials: SDF
Re: Wei Ya C3129DS chassis not working
I would check supply voltage of the relais to see if the problem is with the voltage supply or the relais. Sounds to me like the supply voltage is beeing build up and then dropped, repeating again and again. If it´is the voltage, look were the voltage is coming from and check those parts.TwinX wrote:
When powered the relais ( i think RL1) clicks unstoppable with approx 1 click per second.
Also there is no nek glow.
I do hear a very faint high pitch sound as i am used from crts.
Where should i start troubleshooting?
In case the voltage supply is in range and steady, remove the relais and test it with an external power supply unit. Exchange the relais in case its faulty.
Last edited by Shadolf on June 14th, 2017, 12:20 pm, edited 1 time in total.
-
- Please Continue...
- Posts: 10
- Joined: May 1st, 2016, 6:51 pm
- Location: Netherlands
- eBay: Earcrusher
- Initials: JEF
Re: Wei Ya C3129DS chassis not working
Thanks Shadolf i will do that.