Another ms2930 problem

For monitor related issues
Post Reply
XeD
Please Continue...
Posts: 19
Joined: June 20th, 2016, 6:18 pm
Location: Canada BC
eBay: Blood_pack
Initials: HVD

Another ms2930 problem

Post by XeD »

Hey folks me again :D
I have a ms2930 that does not have any blue. Blue gun work, for sure. If I turn up the blue cut off the whole screen will turn blue. If I swap the red and blue wire going to neck board blue will show in the red location. If I swap the red blue from pcb to chassis I get nothing. From that I take it I have a problem somewhere in the main chassis. Adjusting the blue bias on the control board does not change much on the blue output of the M51387P IC. With red I can see it fluctuate.
User avatar
grantspain
Tech Head
Posts: 4823
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Another ms2930 problem

Post by grantspain »

if you swap the red and blue wires to the neck card it will prove if the fault is neck card or colour decoder circuit
User avatar
nem
Needs a custom rank
Posts: 2768
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Another ms2930 problem

Post by nem »

XeD wrote:Adjusting the blue bias on the control board does not change much on the blue output of the M51387P IC. With red I can see it fluctuate.
You sure the pot for the blue gain is working OK? Have you tried a different control board?
Post Reply