Arcade Otaku - アーケード オタク

Hi Guys,

recently I have replace my Philips / LG weyia chassis monitor with like new Toshiba D29CQ51

But I have problem with image, it seems to have strangely altered colors and effect of contrails.







Video problem

https://youtu.be/vwuVZT1ge8s

Please help me, I wait very long time to fix my monitor with fantastic toshiba!

did you swap chassis or entire monitor?
in any case looks like video signal too high-like running 15khz via a 31khz connection

Complete new monitor,

Is possible the problem is the RGB Cut or rgb gain setup?
I realized that I connect RGB IN 0.7V connector port now I inseret in rgb connetor 3.3V, I think this is correct.
the quality of the images is good now, but the color problem is alive.
I read on wiki that this monitor has a secret menu for the color arrangement and geometry.






http://wiki.arcadeotaku.com/w/Toshiba_PF_D29C051
I have try to setup color, but problem not resolved.

please help

something wrong with your rgb wiring

I connected directly Naomi to VGA but the colors are always altered.

Now I only have the VGA port connected to the frame, what could be wrong?

thank you for help me grantspain

is it a standard vga cable?
first thing i would do is connect a pc and enter cmos settings(do not boot to operation system just in case it boots at 800 x 600)-see what the picture looks like

i can't see any blue on the last photo btw

Yes cables VGA is a standard.

Egret 3 wiring have a customs cable ?