Yellowish cast to part of screen?

For monitor related issues
Post Reply
tzakiel
Posts: 60
Joined: January 10th, 2017, 3:28 am
Location: Virginia, USA

Yellowish cast to part of screen?

Post by tzakiel »

This is a nanao 2930 with a yellowish cast to just part of the screen. What could cause this? The lines are supposed to be pure white, and they are except where circled, they have a yellow tone. It doesn't seem to be convergence, it is yellowish even where the colors converge correctly there.
You do not have the required permissions to view the files attached to this post.
User avatar
hindered
Posts: 74
Joined: August 26th, 2009, 6:38 pm
Location:

Re: Yellowish cast to part of screen?

Post by hindered »

Starting simply -- have you tried degaussing?
User avatar
NoAffinity
Posts: 386
Joined: January 8th, 2017, 3:46 pm
Location: Escondido, CA, USA
eBay: noaffinity
Initials: CSG
Contact:

Re: Yellowish cast to part of screen?

Post by NoAffinity »

^In that same vein, if you position the screen in a different direction, does the discoloration change or go away? For instance, if it's facing north as shown in the picture, does it change if you face it east, west or south?
tzakiel
Posts: 60
Joined: January 10th, 2017, 3:28 am
Location: Virginia, USA

Re: Yellowish cast to part of screen?

Post by tzakiel »

Good news... it went away with the next time I turned on screen. I also ran a degauss which corrected some other oddities as well.
User avatar
hindered
Posts: 74
Joined: August 26th, 2009, 6:38 pm
Location:

Re: Yellowish cast to part of screen?

Post by hindered »

I love the easy fixes. :)
Post Reply