Egret 3 chassis replacement

For monitor related issues
User avatar
OlDirty
Posts: 309
Joined: January 12th, 2015, 8:26 pm
Location: Switzerland

Egret 3 chassis replacement

Post by OlDirty »

Hi

Can someone tell me if a Wei-ya C3129DHSS chassis would work as a replacement for a Wei-ya C3129D01-7 ?
Londoncalling
Please Continue...
Posts: 53
Joined: December 18th, 2013, 12:17 am
Location:

Re: Egret 3 chassis replacement

Post by Londoncalling »

What's the tube number on your Egret3?
That chassis shows as a replacement for Samsung A68QCP891X002
User avatar
OlDirty
Posts: 309
Joined: January 12th, 2015, 8:26 pm
Location: Switzerland

Re: Egret 3 chassis replacement

Post by OlDirty »

Tube No is : LG.PHilips A68QCU970X V4
DSC08225.JPG
You do not have the required permissions to view the files attached to this post.
User avatar
thechop
Not as old as Ralph
Posts: 1262
Joined: August 24th, 2008, 1:17 pm
Location: Wubbly Wolverhampton.

Re: Egret 3 chassis replacement

Post by thechop »

That's a dual focus chassis (you can tell from the 2 pin socket) single focus there's only one it's the same as the one I have for sale with a Phillips tube.
A single focus chassis won't fit so the replacement needs to be dual focus to fit the tube.
kernow wrote:
Cmon chop I wanna see your manly bricklayer arms.
User avatar
OlDirty
Posts: 309
Joined: January 12th, 2015, 8:26 pm
Location: Switzerland

Re: Egret 3 chassis replacement

Post by OlDirty »

Can someone tell me if a C3129D03 chassis could be used as a replacement for my C3129D01-7 ? Thanks
User avatar
turntablism
Posts: 280
Joined: June 11th, 2010, 8:11 am
Location: Zurich, Switzerland

Re: Egret 3 chassis replacement

Post by turntablism »

I have an M3129D01-7 in My AWSD
dont know if thg C3129D03 is compatible with your E3
http://www.yodel-arcade.blogspot.com" onclick="window.open(this.href);return false;
https://www.youtube.com/user/Fanaticcism" onclick="window.open(this.href);return false;
User avatar
OlDirty
Posts: 309
Joined: January 12th, 2015, 8:26 pm
Location: Switzerland

Re: Egret 3 chassis replacement

Post by OlDirty »

I got this message from Mr. Wei-ya :cry:

After our engineer review, C3129D03 CANNOT replace with C3129D01-7 directly,
since there over ten parts difference on main board/CRT board/small board.
User avatar
OlDirty
Posts: 309
Joined: January 12th, 2015, 8:26 pm
Location: Switzerland

Re: Egret 3 chassis replacement

Post by OlDirty »

Someone tries to fix my chassis but we need help. Does someone has a schematic of this chassis?

I am in need to get some information about this chassis
01.jpg
02.jpg
It works with some prob in the H-deflection.
There is a small auxiliary upright board in the near of the line-out-transformer.
Some connectors at its edge look burnt, but they are really good.
Nearby a resistor (R17?) ist burnt and open circuit, therefore the plastic is melted.
The big brown cap at its side is in spec.
Does any manual exist? Any the value of the resistor may move me forward.
You do not have the required permissions to view the files attached to this post.
User avatar
Shadolf
Posts: 287
Joined: November 6th, 2014, 12:20 pm
Location: South Germany
eBay: 1984indigo

Re: Egret 3 chassis replacement

Post by Shadolf »

Maybe you can get a scematic directly from Wei-ya.
Can you see any numbers or a color code on the resistor?
I also don't have such a monitor/chassis but maybe the is someone arround who has one and can identify the values of the bad components. You could make some fotos, too.
User avatar
OlDirty
Posts: 309
Joined: January 12th, 2015, 8:26 pm
Location: Switzerland

Re: Egret 3 chassis replacement

Post by OlDirty »

It's the R17 resistor which is burnt and he can't see any colors anymore. Unfortunately he has the chassis so i can't take any pics. I just wrote to Wei-ya. Thanks the help
User avatar
grantspain
Tech Head
Posts: 4823
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Egret 3 chassis replacement

Post by grantspain »

47 ohm 2w metal oxide
User avatar
OlDirty
Posts: 309
Joined: January 12th, 2015, 8:26 pm
Location: Switzerland

Re: Egret 3 chassis replacement

Post by OlDirty »

Thanks. Do you also have a schematic? :awe:
User avatar
grantspain
Tech Head
Posts: 4823
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Egret 3 chassis replacement

Post by grantspain »

no one has a schematic for these and wei ya will not release one
you can use the rodotron 666 schematic as the majority of the chassis is the same
the fact that resistor is cooked may point towards the HOT being short circuit
User avatar
OlDirty
Posts: 309
Joined: January 12th, 2015, 8:26 pm
Location: Switzerland

Re: Egret 3 chassis replacement

Post by OlDirty »

I emailed Wei-ya and you won't believe what i got :D . A schematic for the M3129D01-7. My one is a C3129... but i hope it's similar.

You said that R17 is 47 ohm 2w metal oxide but in both schematics it's 1kOhm?!?
User avatar
grantspain
Tech Head
Posts: 4823
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Egret 3 chassis replacement

Post by grantspain »

well that what is is on two chassis I have here
User avatar
OlDirty
Posts: 309
Joined: January 12th, 2015, 8:26 pm
Location: Switzerland

Re: Egret 3 chassis replacement

Post by OlDirty »

And you have excatly the C3129D01-7? Strange
User avatar
grantspain
Tech Head
Posts: 4823
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Egret 3 chassis replacement

Post by grantspain »

mine is the original c3129d chassis
perhaps you have the later chassis with the single connector to the 31khz switching pcb
20170428_083441.jpg
20170428_083526.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
OlDirty
Posts: 309
Joined: January 12th, 2015, 8:26 pm
Location: Switzerland

Re: Egret 3 chassis replacement

Post by OlDirty »

In my chassis the resistor was pink, but unfortunately it's not possible to see the value on the old picture. :( Thanks a lot for your help

I just checked the R17 again on the small board and it's 47 / 2W. You are right. On the schematic were 2 R17, so that's why i was confused.

Here's the schematic for a M3129D01-7 M3129D01-72 (C3129D01-72): http://uploaded.net/file/nhj7p81l
User avatar
invzim
Posts: 472
Joined: August 17th, 2008, 5:26 pm
Location: Oslo, Norway
eBay: prrole

Re: Egret 3 chassis replacement

Post by invzim »

Great getting the schematic!

Not sure where to stick it, but at least it's on the wiki:

http://wiki.arcadeotaku.com/w/Taito_Egret_3
I make and sell cool Arcade stuff, check out https://irkenlabs.com/ - In The Name of Science!
User avatar
OlDirty
Posts: 309
Joined: January 12th, 2015, 8:26 pm
Location: Switzerland

Re: Egret 3 chassis replacement

Post by OlDirty »

So what was the problem with the chassis. I try to translate what was discovered.

R17 is on a additional board "3119-3" PCB is in serie circuit with C8 and T1 on the lead of D and F
D leads to the base point of the H-deflection of the "Zeilenlinearitätsspule" :P
F leads to the middle point of the O/W modulation control
Therefore this circuit is placed paralell to the tangens condensator C84
Because of that the resistor can be destroyed if the main lead over the tangens condensator is interrupted

Something like this :D

So the tangens condensator C84 and the resistor R17 were broken.
Post Reply